rolling preparation station.thc

3D MODEL DESCRIPTION
**A tobacco storage box that can be used as a rolling preparation station.

**Contains two files for download:

1x Supportless THC smoking tobacco storage chamber.
1x Smoke box lid (should be printed without supports and without build plate adhesion, i.e., no brim, rafts, or skirts).

**Smoke box features:

1x Rolling preparation funnel rod and rolling table,
1x 166mm x 97.5mm general storage section,
1x Super king-size rolling paper holder,
1x standard-size rolling paper holder (vertical holder),
2x 6mm holes for filters, pokers, and cards,
1x Plastic magnetic grinder holder (can accommodate grinders with a diameter of up to 56mm).

This 3D model set includes our original designs to prevent any copyright issues.

3D PRINTING SETTINGS
**Specifications and settings for the smoke box lid:

Using the settings specified in Cura,
And Cura print time (Ender 5 Plus 40mm/s):

Settings (using Cura 4.7 with Creality Ender 5 Plus):
Nozzle size: 0.4
Layer height: 0.2
Initial layer height: 0.2
Wall thickness: 1.6
Wall line count: 4
Top/Bottom thickness: 0.8
Top thickness: 0.8
Top layers: 4
Bottom thickness: 0.8
Bottom layers: 4
Horizontal expansion: 0
Infill density: 20 (you can have a higher infill density for more strength)
Infill pattern: Cubic
Build plate adhesion type: NONE, or the artwork won't stand out.
Generate support: only required for visible surfaces.