Fidget spinner - print in place

Product description:

The "Fidget Spinner" is a revolutionary 3D printed spinner that offers the ultimate fidget experience. With its ease of use and print-in-place technology, it brings the fun right to you without any hassle.

Key features:

Easy printing: our Fidget Spinner is designed for effortless 3D printing. You don't need any extra parts or assembly. Just print it and go.

Inner diameter 17.5 mm: The perfect diameter for convenient handling and smooth rotation.

Outer Diameter 78mm: This spinner is the perfect size for your hand to take it anywhere.

Low height of 7.5mm: The slim profile allows for comfortable use and easy storage.

Fast printing: with an estimated printing time of only about 1 hour (depending on your 3D printer), you can start playing in no time.

Technical specifications:

Diameter: inner diameter 17.5 mm, outer diameter 78 mm, height 7.5 mm

Printing time: Approximately 1 hour (depending on your 3D printer).

Material: High quality, durable plastic material

The "Fidget Spinner" is not only a fun pastime, but also a proven tool for reducing stress and increasing concentration. Print it yourself and experience instant relaxation and fun. It also makes a great gift for friends and family looking for a simple and effective way to relieve stress.

Print speed:

Layer height: 0.1 mm (This provides a good balance between print time and quality).

Print speed: 50 - 150 mm/s (May vary depending on printer; adjust to get the best results).

Temperature:

Nozzle temperature: 200-220°C (Depends on your filament; use the filament manufacturer's recommended temperatures).

Bed temperature: 60°C (If your printer has a heated platen; optional).

Filling and wall:

Filling density: 20-30% (For a solid spinner, you can use 20%; for more weight and stability, you can choose 30%).

Number of outer walls: 3 (This ensures a solid outer layer).

Number of layers for top and bottom layers: 3 (For a smooth surface.)

Support structures and raft (if required):

Support structures: Not required (Since this is a "print in place" spinner, support structures are generally not required).

Raft: Not required (Unless your printer manufacturer specifically recommends it).

Print bed preparation:

Print bed leveling: make sure your print bed is properly aligned to ensure good adhesion.

Adhesives: Blue Painter's Tape, Kapton Tape or Adhesive Sprays can be used if your print bed is having difficulty adhering the filament.

Other considerations:

Carefully calibrate your printer to ensure it prints accurately.

Monitor the printing process, especially during the first few shifts, to make sure everything is running smoothly.

Please note that these are general recommendations and it may be necessary to adjust the settings to your specific 3D printer and the filament you are using. For best results, experiment and fine-tune settings based on print results.