Dark Trooper Phase Zero

This is my version of the Dark Trooper Phase Zero helmet from the Star Wars universe.
The helmet is based on the classic Stormtrooper helmet design.

• The helmet is designed for a medium sized head. The shape of the helmet is loose, so there should be no problems putting it on. There's plenty of room inside for soft padding.
• The thickness of the helmet wall is 4 mm. This will allow you to change the size of the helmet up or down without losing strength.
• Here is one version of the helmet - with an open visor and separate lenses 3 mm thick. For gluing them from the inside there is a small side 5 mm wide.
• The main helmet is not divided into parts and is one model. You can divide it yourself based on your printer model, printing settings and experience.
• I separated small parts such as filters, parts on the sides, etc. and placed them on a plane for ease of printing. But you can arrange them in any way that is convenient for you, there are no restrictions.
• I'm assuming the helmet will be tilted forward a bit when putting it on. With this position of the helmet there will be a good view through the visor. In several screenshots I showed the angle of the helmet and the level of the eyes relative to the visor.

If you have questions or suggestions for modifications to this project, write me a message and I will try to help.