The Witcher plates for Light and Shadow boxes

This new set is a must-have for us. We've read the books, played the video game (in 'Death March' mode, hahaha), and watched the series.

The video game is undoubtedly one of the best we've ever played.

The set consists of 5 plates, and we've used the following colors:

Plate 1: black
Plate 2: green
Plate 3: gray
Plate 4: blue
Plate 5: glow

But if you want to try other combinations, there are certainly several that will look fantastic.

We also include a logo with the wolf's face. We kind of like it without the logo, but we've attached photos so you can decide which one you prefer.

Once again, the logo consists of two parts:

Hook

TW_logo: it is printed in three colors:

Black glitter (or the one you haver used for the box)
Grey (color change at 2.8 mm)
Red (at 3.2 mm)

There is a cylinder with the TW_logo to be sure the eyes print. This way, it is not necessary to adjust retraction for this case.

To join these two parts, a drop of glue is sufficient.

To download the wall-mounted box:

Box with light: https://cults3d.com/en/3d-model/home/box-with-hangable-lid-and-lights
Box with NO light: https://cults3d.com/en/3d-model/home/box-with-hangable-lid-and-no-lights

And for the one-piece free boxes:

Box with light: https://cults3d.com/en/3d-model/home/box-with-lights-one-piece-version
Box with No light: https://cults3d.com/en/3d-model/home/box-no-lights-one-piece-version

All Quimicafeina designs are protected by Copyright Law. By downloading, you have no right to sell or distribute any digital files or reproductions from those files.

If you are interested on exclusive content or privileges, you can support us on patreon.

Printing settings:

Nozzle diameter: 0.4 mm
Layer height: 0.20 mm
Prints with no supports