Wraithwing Dragon, Halloween Skeleton Dragon, Flexible Print in Place, Cinderwing3D

Finally, after tons of testing, THANK YOU TEST TEAM, I am bringing you all the WRAITHWING DRAGON!
This dragon prints in place with no supports! It has a snap up neck, pop in ball socket wings, and click in legs for upright positioning! There are also 2 SETS of different wings! You get to pick!
*_**
IMPORTANT INFO:
This dragon has been tested multiple times between 50 and 110%. The original size at 100% fits an Ender printer. For Bambu printers it can be scaled up to 110% for maximum size. With larger sizes though the ball socket wings can be hard to pop in, and once in, are hard to move around. If you are worried about it or are having trouble with getting them to fit we suggest reducing wing size by 1%. At smaller sizes the originally proportioned wing works great as is.
Also take care to support the upper leg when clicking the legs in place. I make every model to be as strong at it can be, but this is probably the weakest point on the dragon because of the lateral layers.
Please remember to ask our Discord Community or email Admin @Jazzy at contactcinderwing3d@gmail.com if you have additional questions or issues!

Hi, I'm Tracy! Veteran, full-time mom, and entrepreneur at heart! I love creating unique and fun designs!

This design (like all Cinderwing3D designs) is under copyright. Which means, upon purchase, you do NOT have the right to sell commercially.
If you would like to legally sell them commercially, please join my Tribe or my Patreon and subscribe to the tier for commercial resale. Link Below!
The Digital files are never to be re-sold, shared, or given away!

Please share images of your creations here by clicking on +Add your picture! I would love to see them! :)

Commercial License and monthly bonus models:
| Patreon |
| Tribes (https://www.myminifactory.com/users/Cinderwing3D?show=tribe) |

To see all things Cinderwing3D, including all of our models (public and exclusive bonus ones) visit our website:
Cinderwing3D Website

Please see our other public models here:
Cinderwing3D Cults Store

Check us out on our socials!
| Facebook |
| Twitter |
| Instagram |
| Tiktok |

FDM Settings

3 walls
10-25% infill
No supports
Raft or brim if you have adhesion issues

Resin Settings

No supports, flat on plate
50 um layer thickness
Light off delay can be helpful to let resin drip from links.

Proper bottom exposure tuning is recommended. Models, particularly in clear resins, can suffer from overexposure and fused links. The Ameralabs Town
testing is highly recommended to tune your settings as to get proper articulated prints! Exposure varies greatly between resins, printers, and environments.