Elixir Splash Dice Tower

The Neopyx3D Elixir Splash Dice Tower has entered the Cults3D #DICEXCULTS contest. It is an easy to print multipart dice tower.

KEEP ROLLIN ROLLIN ROLLIN...

The dice tower contains of 4 parts:

1 - Flask
2 - Liquid top part
3 - Cracked Couldron
4 - Liquid bottom part with couldron bottom

At first choose awesome colors for your parts! With glowing or luminous colors your liquid stand out!

After printing your four parts you have to glue the flask and liquid top part together (there is a notch at the liquid top part for easy glueing). Next step is to glue the flask including the liquid top part on top of the Couldron (IMPORTANT AT THIS STEP: The hole of the flask should be placed on the opposite side of the crack of the couldron). Finally place the Couldron over the liquid bottom part (no glueing).

Now you are finished! Roll your dices like never before.

You can also watch my Instagram Reel or TikTok related to the dice tower to see how it is put together by myself.

The dice tower was tested with basic size dices:

6-sided dice: 16mm
20-sided dice: 20mm

I hope you enjoy this design. It was my first dice tower. Please leave a like, share your make on Cults3d, Instagram and TikTok and tag Neopyx3D.

This download is for personal and non-commercial use only. Don´t sell my designs or printed designs without permission.

If you want to sell your 3D-printed Neopyx3D designs you need a Neopyx3D - Vendor membership via Patreon. Follow the Patreon link on my profile and join the vendor membership for only 4$ per month.

Feedback is always welcome.

Thank you for download and happy printing!

Recommended Main Settings Flask:
Layer height: 0.2
Infill 10 - 12%
Top Pattern: Concentric
Speed: 40 - 60 mm/s
Print Acceleration: 2750 mm/s2
Print Jerk: 9 mm/s
Supports: No Supports needed
Build Plate Adhesion Type: Skirt or Brim (recommended)
Printing Temperature and Cooling: depends on filament

Recommended Main Settings Couldron:
Layer height: 0.2
Infill 10 - 12%
Top Pattern: Concentric
Speed: 40 - 60 mm/s
Print Acceleration: 2750 mm/s2
Print Jerk: 9 mm/s
Supports: No Supports needed
Build Plate Adhesion Type: Brim
Printing Temperature and Cooling: depends on filament

Recommended Main Settings Top Liquid:
Layer height: 0.2
Infill 10 - 12%
Speed: 40 - 60 mm/s
Print Acceleration: 2750 mm/s2
Print Jerk: 9 mm/s
Supports: No Supports needed
Build Plate Adhesion Type: Skirt or Brim
Printing Temperature and Cooling: depends on filament

Recommended Main Settings Bottom Liquid:
Layer height: 0.2
Infill 10 - 12%
Speed: 40 - 60 mm/s
Print Acceleration: 2750 mm/s2
Print Jerk: 9 mm/s
Supports: No Supports needed
Build Plate Adhesion Type: Skirt or Brim
Printing Temperature and Cooling: depends on filament