Titan Master Quintesson

I PRESENT YOU THE INFINITE QUINTESSON MASTER
you will ask, but where are the faces
ANY TITAN MASTER CAN BE

PLEASE, if you purchase and print this, do not hesitate to post a make or send me photos of your titan master combination, i would really appreciate it

i designed this quintesson to be able to use ANY 5 titan or prime master as each one of its faces
wont say the possibilities are infinite but they are still quite a lot
be that a 5 optimus, or megatron quintesson, a fembot quintesson using arcee, nautica, windblade etc.
using any repaint of the same mold or whatever mold you like in any order

push a button on top of the head to rotate one face at a time; dont know how fast can it rotate but i know it would require consecutive presses as the mechanism is based on a pen, uses a pen spring as well for convenience

energy beam uses a 5mm post on top and has a 5mm port on the bottom, maybe can be used to extend another blast effect, probably wont look good on its own though because of the flat section at the end, for which i included a second effect that can be used to complete it

last but not least, has a 3mm port on each of the balljointed tentacles, and a 3 mm post at the very end, not only it can use any 3mm weapon and of course blast effects but can in fact HOLD titan masters; titan masters have a 3mm diameter screw hole on the front, prime masters use an slightly bigger one so they cannot be held by the tentacle

Notes, there are 10 tentacles included, each set of 5 set on a different orientation as i dont currently know the optimal printing position for those, also includes 2 sets of buttons, one upside down for the same reason

Update: changed the mechanism gear design so it allows one to manually rotate the faces without breaking

Assembly instructions added (while amateur, hope they are clear enough to understand)

supports required
set to a minimum of an mm from the base
because of the mechanism i would recommend a minimum of 50% infill