HO Scale Logger Truck STLs - Optimized for FDM 3D Printing

Looking for a clean and easy to print logger truck for your HO scale railroad layout? This should do nicely!

This is a Digital Product (STLs).
(The green 3D Printed truck pictured is not included and is for demonstration only)

The files are optimized for FDM 3D printing. I used a .25 mm nozzle at .15 mm layer height but you could lower the height to get less stepping.
I printed in ABS and used super glue with a spray activator for assembly.

Files come oriented for printing and do not require supports.

The roof is split from the truck so it can be printed separately and glued on along with the tires, headlights, and mirrors.

The forks and trailer connections have a very simple key-like locking mechanism that allows them to rotate without slipping off.

I have included an "AllInOne" file with all the parts that you can print instead of needing to open each individual file.

File List:
01_Logger_AllInOne
02_LoggerTruck
03_LoggerTruckRoof
04_LoggerTrailer
05_Forks
06_BackTires
07_FrontTires
08_LightsMirrors

The files are optimized for FDM 3D printing. I used a .25 mm nozzle at .15 mm layer height but you could lower the height to get less stepping.
I printed in ABS and used super glue with a spray activator for assembly.
Files come oriented for printing and do not require supports.