Fate/Samurai Remnant - Yui Shousetsu Ear Pendant

This model is designed for Yui Shousetsu cosplay from Fate/Samurai Remnant.

It comes in two parts, the ring and the pendant (A).

Both parts are designed in half for an easier print. Due to the shape of the model, it is quite hard to remove from the build plate. Please be extra careful when you are removing it from the build plate.

I set the default thickness slightly thicker to ensure an FDM printer can print it well. You can scale the thickness down if you have confidence in your printer or if you are using an SLA printer which is better for printing small parts.

I made a combined version for both parts. You can print this version if you are using an SLA printer which has support that is easier to remove.

The ring is optional to print if you have a similar ready-made ring that can be used in this craft. Printing the ring should be the last resort if you don't have anything to replace. It is quite hard to print the ring on an FDM printer, you may want to print it with a few layers of brim or raft.

You will need two long red strips of cloth to complete the prop. The cut-out on the ear pendant allows a cloth with a thickness of not more than 2mm to pass through.

For scaling, please use the same scale for both parts.

Cheers and Happy Printing!

Dimension: 80mm x 56.60mm x 15.93mm