Skip to content

Steambow AR6 Stinger II - 12 SHOOT MAGAZINE PACKAGE

PhotoRoom_20240202_185454.jpg Steambow AR6 Stinger II - 12 SHOOT MAGAZINE PACKAGE
Stinger-12-Shoot-Render.jpg Steambow AR6 Stinger II - 12 SHOOT MAGAZINE PACKAGE
ForeGrip.jpg Steambow AR6 Stinger II - 12 SHOOT MAGAZINE PACKAGE
ForeGrip-Bent.jpg Steambow AR6 Stinger II - 12 SHOOT MAGAZINE PACKAGE
What-is-needed.jpg Steambow AR6 Stinger II - 12 SHOOT MAGAZINE PACKAGE
AD864E6F-52BD-440F-95A0-A667CB8C823E.jpeg Steambow AR6 Stinger II - 12 SHOOT MAGAZINE PACKAGE
DSC02487.jpg Steambow AR6 Stinger II - 12 SHOOT MAGAZINE PACKAGE
DSC02488.jpg Steambow AR6 Stinger II - 12 SHOOT MAGAZINE PACKAGE
DSC02496.jpg Steambow AR6 Stinger II - 12 SHOOT MAGAZINE PACKAGE
DSC02505.jpg Steambow AR6 Stinger II - 12 SHOOT MAGAZINE PACKAGE

🔫 3D models of guns or weapons are dummy objects or prop toys and have no real functionality as weapons. They are intended for entertainment or decorative purposes only. For any design violating our T&Cs, please report them.

Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.
  • 4.2k views
  • 13 likes
  • 7 downloads
  • 1 collection
  • 2 comments
License
3D design format
PDF and ZIP Folder details Close
  • Parts List 12 Shoot Magazine.pdf
  • Stinger Files.zip
    • Assembling Video.pdf
    • Fore Grip/Grip Stinger left.3mf
    • Fore Grip/Grip Stinger right.3mf
    • ForeGrip Bent 12-Shoot/Parts to print/Foregrip Bent left.stl
    • ForeGrip Bent 12-Shoot/Parts to print/ForeGrip Bent right.stl
    • ForeGrip Bent 12-Shoot/Partslist Fore Grip Alligator II Bent - 12 Shoot.pdf
    • Information.pdf
    • Magazine/Back Middle Left long - Stinger II.stl
    • Magazine/Back Middle Right long - Stinger II.stl
    • Magazine/Button Left - Stinger II.stl
    • Magazine/Button Right - Stinger II.stl
    • Magazine/Front Left Bottom - Stinger II.stl
    • Magazine/Front Right Bottom - Stinger II.stl
    • Magazine/Parts List 12 Shoot Magazine.pdf
    • Magazine/Picatinny Left - Stinger II.stl
    • Magazine/Picatinny Right Stinger II.stl
    • Magazine/Picatinny_Back short 1 v1.3mf
    • Magazine/Picatinny_Back_Long 2 Stinger II.stl
    • Magazine/Picatinny_Front - Stinger II.stl
    • Magazine/Pivot - Stinger II.stl
    • Magazine/Release - Stinger II.stl
    • Magazine/Side Left - Stinger II.stl
    • Magazine/Side Right - Stinger II.stl
    • Magazine/Stinger II - 12 Shoot_Back Middle Left short - Stinger II v1.3mf
    • Magazine/Stinger II - 12 Shoot_Back Middle Right short - Stinger II v1.3mf
    • Magazine/Stopper - Stinger II.stl
    • Magazine/Top Left - Stinger II.stl
    • Magazine/Top Right - Stinger II.stl
    • Sideplates for Multicolour Print/Cover Left Stinger II v5.3mf
    • Sideplates for Multicolour Print/Cover Right Stinger II v4.3mf
    • Sideplates for Multicolour Print/Cover Stinger Orca Slicer.3mf

Learn more about the formats
Last update 2023-12-26 at 10:27
Publication date 2023-11-03 at 20:00
Design number 1555922
eheimgartner

eheimgartner

3D printer file info

3D model description

Update 26.12.2023:
Added an new Parts List incl. sourcing links

Update 08.11.2023:
Added Orca Slicer File for the Multicolor Sideplates

Update 07.11.2023:
Short Back Version added
Assembling Video added

First of all

Before you buying make sure it is legal to your country!
You build it at your own responsibillity and i´m not responsible for the consequences of using, building and possession.

Be aware that this is not a toy!
If you want to build this project, you must be experianced in 3D printing to get dimensionally accurate parts. Depending on your printer settings, maybe some parts need some fine tuning.

This is my new 12 shoot magazine for the Steambow Stinger 2 pistol crossbow. I also made an new fore grip and it´s also included.

I can´t garantuee that it works with all bolts because i don´t have all bolts from all manufactors. I only tested it with Steambow Training bolts and some cheap bolts from ebay (Archery Research). I guess it should work fine with the most of all 6.3-6.5" bolts.

With this model i made more than 1000 test shoots without any jam.. it should work very well.

I highly recommend to use bolts with the same diameter… sometimes bolts are a little bit different and that can cause a jam. i did hundreds of shoots without any issues. It‘s also very importend to check the bolts if they are damaged or bent. this also can cause an failure

In the back i made two versions. Version 1 to use an standard RedDot and Version 2 to use an small scope with an lenght of 150mm. If a longer picatinny is needed let me know. The short Version will be released in a few days.

I got a lot of questions about assembling in my previous Slinghammer Convertion Kit Project so i made for this a simple assembling video on youtube. At the moment it´s only an old version of this video online. there was a few changes to that and there is an new video comming.

All the parts i printed on my BambuLab X1C so with an print size of 256x256. I used for this project PLA+ and it worked pretty fine. I used 7 Walls, 7 Top- an Bottom Layers and 30% Gyroid Infill.

Feel free to ask if something isn´t clear. Thanks for you support.

i made this magazine also for the ManKung Alligator II...

The Function of the magazine is the same so i linked the videos from the Alligator II.. New videos are in the making....

Here you can find an short shooting video:

https://youtu.be/DqMXQOHSJTw

Speedloader:

https://youtube.com/shorts/JKKgO8hOybY?si=fEHlZV3LF5GjfzMX

Hope you like it.

Files are only for privat use. not commercial

Things i use on my crossbow:

Diana 3x44 grün rot punkt visier
https://s.click.aliexpress.com/e/_DCqkH2p
Red Dot Laser Anblick Taktische 20mm Standard Picatinny
https://s.click.aliexpress.com/e/_DFpoTbF
Targets Sticker:
https://s.click.aliexpress.com/e/_DlR9mUv
https://s.click.aliexpress.com/e/_DBw7IQl
Taktische rmr romeo5 1x20 rot punkt visier holo
https://s.click.aliexpress.com/e/_DFIiONT

3D printing settings

All the parts i printed on my BambuLab X1C so with an print size of 256x256. I used for this project PLA+ and it worked pretty fine. I used 7 Walls, 7 Top- an Bottom Layers and 30% Gyroid Infill.

Categories

Designs › Various › Prototyping / Sports & outdoor

Tags

Advertising

Issue with this design? Report a problem.

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi 💜.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.