3D model description
Ready-to-print STL models to create customized drawers to hold various small parts. They are modular and printable in VASE MODE.
ATTENTION the files are solid STL, when you set "Print in vase mode" in your slicer (I use Prusa Slicer 2.6), the solids will be emptied.
All the frames can be connected in different ways, they fit together easily and can be assembled as you wish, finishes are also available for the upper and left-right sides, they can be removed as you wish, changing the colors as you wish. This project is very compact and there are no spaces that are too high between one drawer and another. The couplers can be used for flat positioning or on an edge fixed with screws. But if you create a composition as illustrated in the photo, the frames are so well fit that they need 5 or 6 couplers, so it depends on how you create a composition. In that configuration you can lift it from above without it being destroyed.
ATTENTION the "CorpoCassettoPiccolo-E+" file is the body for the "CassettoPiccoloE+Smooth" drawer
They are slightly taller.
VIDEO FOR MORE DETAILS ON INSTAGRAM : https://www.instagram.com/reel/CzXcAcyRyvr/?utm_source=ig_web_copy_link
This project was created by me and any form of copying or derivation is prohibited, strictly personal use only.
3D printing settings
Download and place the files in the right position in your slicer so that when you activate "Vase Mode" they form the right print of the external FORM and the DRAWER.
The 30mm Coupler could be shortened on the Z axis by 0.61mm with your own slicer (I use Prusa Slicer 2.6.1)
printer: Ender 3 S1 PRO
filament: PLA
nozzle: 0.4
layer: 0.2
flow : 1
speed 90mm/s including side and top trim and couplers.
The tolerance ranges from 0.2 per side to 0.3 per side, for drawers and containers,
The printing of the drawers and container bodies is carried out with:
Ender 3 SKRMini v.2
PLAHD Winkle - EryOne PLA - Overture PLA
nozzle temp 210Β°-200Β°
bed temp 45Β°-0Β°
fan 100%
nozzle 0.8
layer 0.3
flow 1
bottom_solid_layer 3
speed ββ40-50mms
ATTENTION adjust it until the corners are all well defined without strange bevels
Also to do attention to Jerk. If you notice corners that are too thin and receding, lower the overall speed or work on the Jerk.
The printing of the finishes and couplers is carried out with:
Ender3 S1 PRO
PLA Overture or Eryone
nozzle temp 210Β°-200Β°
bed temp 65Β°-60Β°
fan 100%
nozzle 0.4
layer 0.2
flow 1
speed 90mm/s
With PrusaSlicer 2.6.1 to better print the H+ and H- dividers, setting "Perimeter generator" to "Classic" will be activated
check the box above "Detect thin walls" to make it active.
Note that this box will be disabled even if checked if you choose the "Arachne" mode and therefore will not work.
Alternatively, to obtain the spaces of the H+ and H- dividers, it is possible to cut out the "Dividers" 6 and 10
A little filing with a metal file may be necessary, but only if there is a slight "Elephant's Foot"
ATTENTION the "CorpoCassettoPiccolo-E+" file is the body for the "CassettoPiccoloE+Smooth" drawer
They are slightly taller.
This project was created by me and any form of copying or derivation is prohibited, strictly personal use only.