Thunderbird 4 Exterior & Interior

Dive into the world of classic British science fiction with this intricately designed model of Thunderbird 4, the iconic yellow submarine from the legendary series "Thunderbirds." Perfect for enthusiasts of the show and collectors of classic TV memorabilia, this model brings to life the underwater rescue vehicle piloted by aquanaut Gordon Tracy.

Every curve and detail has been crafted to reflect the spirit of the original design, offering a piece of nostalgia that's ready to be displayed. Whether you're recreating daring sea rescues or simply admiring the craftsmanship, this Thunderbird 4 model is a must-have for fans of the series and lovers of retro-futuristic design. Get ready to make a splash with this stunning tribute to one of television's most beloved vehicles.

Tags:

Material: Top-grade resin, with a meticulous mixing process to avoid air bubbles.

Layer Height (Resolution): 0.1mm (100 microns) for detailed representation.

Infill: A standard of 20%, adjustable based on desired solidity.

Shells/Wall Thickness: 3-4 shells recommended for a sturdy outcome.

Orientation: Preferably, position sculptures upright. Make angle adjustments if necessary to reduce overhangs.

Supports: Implement water-soluble or easy-breakaway supports, especially focusing on pronounced facial features.

Build Plate Adhesion: Consider using a raft or brim for enhanced stability.

Temperature Settings:

Resin: Typically in the range of 25°C to 30°C, based on manufacturer's advice.
Build Plate: Around 60°C to 70°C, if applicable.
Print Speed: Start with a speed of 40-50mm/s, slowing to 30mm/s for intricate areas.

Post-Processing: After printing, it's pivotal to cure the sculptures under UV light. Depending on the specific resin, a general guide is 2-4 hours, ensuring rotation for even curing.