Christmas wreath and centerpiece *Commercial Version*

Important when buying this design version:
This is the commercial version of "Christmas wreath and centerpiece". If you buy them, you will be able to 3D print and sell the prints, as many times as you want to. (Only the physical models, not the digital models/stls file!)
This file is not to be sold, shared, or given to anyone else.

There are files without the logo so you can choose to print without it only the personal use version has the logo on them. Just make sure to use my autorised sellers badge when selling my models at events, on websites ect :-)

I have a patreon where you can sign up to get the commercial tier here, this does include my full catalog, and a couple of patreon exclusive files:
https://www.patreon.com/Sassiecat3d

For the non commercial version look here:
https://cults3d.com/en/3d-model/home/mini-christmas-wreath-and-centerpiece

This is a design I have been working on for a long time. Its taken a lot of testprinting, but finally I have a version I am satisfied with.

For the commercial version you will get the big Wreath design, and also the mini as I call it. All is included in the commercial version.

All files without the "mini" in the name are to be printed like this:

I have printed ”4x christmas_wreath_click” with supports, they click together using gentle force. You might have to glue just to make sure everything stays, if you use it to hang on the door.

For the wreath you need to print 4x6 leafs to mount on the 2 lover levels of the wreath.

You will need to print 4x5 Flowers for the third level of the wreath after you have mounted the leafs.

Then for the top level you can either print 3 flowers and the dragon
or

8 flowers to use for the forth level that is also the top level.

For the center piece or the seperate flower arrangment, you will need to print the following:

4x flower
4x leaf
1x pot

for the stems you can either print

1x stem_flowers
1x stem_leaf

or

1x Both_stems

All files labeled Mini are to be printed like this:

I have printed 1x ”wreath_mini_personal” no supports.

For the wreath you need to print 4x6 leafs to mount on the 2 lover levels of the wreath.

You will need to print 4x5 Flowers for the third level of the wreath after you have mounted the leafs.

Then 8 flowers to use for the forth level that is also the top level.

For the center piece or the seperate flower arrangment, you will need to print the following:

4x flower_mini_personal
4x leaf_mini_personal

for the stems you need to print

1x stem_flower_mini_personal
1x stem_leaf_mini_personal

1x pot_mini_personal

If you have any questions, please write me and I will gladly help!

I used a .4mm nozzle, .2mm layer height, I use 10% infill.

I do suggest using supports for the big wreath base parts.

Make sure your printer is all set with a good calibration and retraction before printing it.