Real Betis Balompié Illuminated Sign

Real Betis Balompié illuminated sign. It is divided into six pieces perfectly printable with a standard FDM printer with a 200x200 mm printing base. In addition to a series of rear interconnectors to ensure the rigidity of the structure.

You can leave it without lights or add an LED strip if you want an incredible finish. The design allows for diffused reflection on the wall, highlighting the outline of the shield.

In any laminator you can separate pieces from the same .STL file into different pieces. It will be necessary for the parts "center_triangle", "letter_links", "crown_links", "additional_hitches" and "hitches". All of these pieces will exceed the print area but, in the arrangement they are in, will be the arrangement in which they are placed on the sign. Don't worry, each one can only occupy one place, it's very intuitive. The "sujeccion_led" piece is simply a cilp to support the fall of the power cable of the led strip, in this way, it will not detach from the printed pieces.

Important: all fasteners and rear hooks must be printed in a color similar to that of the wall where the sign is placed. In this way they will not be visible.

Layer height: 0.2-0.3 mm

Perimeters: 1

Filling: 10-20%

Top layers: 3

Lower layers: 3

Speed: 65 mm/s

Skirt/skirt: No

Supports: Yes