Milwaukee M12 High Capacity Battery Rubberized Magnetic Base

Custom Designed and 3d printed Rubberized Magnetic Battery Covers for the Milwaukee M12 and M18 common battery sizes. Each tool was created by 3d scanning the battery packs and using them as a mold to make a perfect fit on the batteries. They are made out of Thermoplastic polyurethane (TPU) which is flexible and will give a rubber protection to the batteries as well. Each Magnetic base is fitted with two 150lbs holding power rare earth neodymium magnets. This gives exceptional holding power even when horizontally positioned.

Please Note: ALL HIGH OUTPUT AND FORGE BATTERIES HAVE A SLIGHT DIFFERENT BATTERY CASE FOOTPRINT SO THEY HAVE NOT BEEN TESTED WITH THESE MAGNETIC COVERS.

YOU WILL NEED TO PURCHASE 2 - 7MM X 36MM 150LB HOLDING POWER NEODYMIUM MAGNETS.. LINK BELOW OF WHAT I'VE USED.

https://www.amazon.com/gp/product/B0CD7C58MD/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1

-M12 High Capacity Model Fits Milwaukee's M12 3ah, 4ah, and 6ah High Capacity Sized Batteries(High Output 5.0ah has not been tested!)

Please Note: These have all been tested out and the batteries and magnets fit snugly. If you print and they do not fit snugly you may need to dial your printer in to tighter tolerances.

I do sell these on my etsy store if you would rather just purchase the finished product. link here:

https://lextrem3designs.etsy.com/listing/1580183508/milwaukee-m12-m18-rubberized-magnetic

95A TPU Recommended( I use Inland and Sainsmart)
.28 Layer Height
20% Infill
3 wall count minimum
Tree Supports to build plate only - for my logo and the back of the unit(If your printer does well with overhangs it may not be necessary)