Skip to content

Crawler G900 4x4 Expedition Suite - 1/10 RC body attachment

IMG_20231109_145124.jpg Crawler G900 4x4 Expedition Suite - 1/10 RC body attachment
IMG_20231109_145049.jpg Crawler G900 4x4 Expedition Suite - 1/10 RC body attachment
IMG_20231109_145606.jpg Crawler G900 4x4 Expedition Suite - 1/10 RC body attachment
IMG_20231109_145304.jpg Crawler G900 4x4 Expedition Suite - 1/10 RC body attachment
IMG_20231109_1459101.jpg Crawler G900 4x4 Expedition Suite - 1/10 RC body attachment
1.png Crawler G900 4x4 Expedition Suite - 1/10 RC body attachment
2.png Crawler G900 4x4 Expedition Suite - 1/10 RC body attachment
3.png Crawler G900 4x4 Expedition Suite - 1/10 RC body attachment
4.png Crawler G900 4x4 Expedition Suite - 1/10 RC body attachment
5.png Crawler G900 4x4 Expedition Suite - 1/10 RC body attachment
6.png Crawler G900 4x4 Expedition Suite - 1/10 RC body attachment
Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.
  • 1.5k views
  • 6 likes
  • 6 downloads
  • 1 collection
License
3D design format
ZIP Folder details Close
  • ahead RC G900 4x4 Exped Suite.zip
    • Fenders/fender left (wide ver).stl
    • Fenders/fender left.stl
    • Fenders/fender right (wide ver).stl
    • Fenders/fender right.stl
    • Door/door hinge 1.stl
    • Door/door hinge 2.stl
    • Door/door.stl
    • Cab/cab suite (split 1).stl
    • Cab/cab suite (split 2).stl
    • Cab/cab suite.stl
    • Cab/side cover left front (324mm wheelbase).stl
    • Cab/side cover left front.stl
    • Cab/side cover right front (324mm wheelbase).stl
    • Cab/side cover right front.stl
    • Cab/skid plate rear (324mm wheelbase).stl
    • Cab/skid plate rear.stl
    • Cab/wall front.stl
    • Cab/wall rear.stl
    • ahead RC G900 4x4 Expedition Suite.pdf
    • DXF/door.dxf
    • DXF/rear window.dxf
    • DXF/Window.dxf
    • Mounts/Mount SCX10 iii L.stl
    • Mounts/Mount SCX10 iii R.stl
    • Mounts/Mount TRX4 L.stl
    • Mounts/Mount TRX4 R.stl
    • Mounts/Mount VS4-10 PRO and SCX10 ii L.stl
    • Mounts/Mount VS4-10 PRO and SCX10 ii R.stl
    • Accessories/antenna mount.stl
    • Accessories/fuel can carriage.stl
    • Accessories/long antenna.stl
    • Accessories/power socket 1.stl
    • Accessories/power socket 2.stl
    • Accessories/power socket cover 1.stl
    • Accessories/power socket cover 2.stl
    • Accessories/short antenna.stl
    • Accessories/tailgate antenna holder.stl
    • Accessories/tailgate multi box lid.stl
    • Accessories/tailgate multi box.stl
    • Accessories/Tall fuel can.stl
    • Accessories/traction board 1.stl
    • Accessories/traction board 2.stl
    • Accessories/traction board guide.stl
    • Accessories/traction board tray door.stl
    • Accessories/traction board tray.stl
    • Lights/cab side lens 1.stl
    • Lights/cab side lens 2.stl
    • Lights/cab side lens 3.stl
    • Lights/cab side lens 4.stl
    • Lights/lens rear left 1.stl
    • Lights/lens rear left 2.stl
    • Lights/lens rear left 3.stl
    • Lights/lens rear right 1.stl
    • Lights/lens rear right 2.stl
    • Lights/lens rear right 3.stl
    • Lights/light bucket rear left.stl
    • Lights/light bucket rear right.stl

Learn more about the formats
Publication date 2023-11-09 at 09:59
Design number 1567065
ahead_RC

ahead_RC

3D printer file info

3D model description

PLEASE make sure your 3D printer is able to print a minimum size of 210x220x175mm before purchasing.

It’s time to go exploring again! The all new G900 4x4 Expedition Suite was designed to work specifically with the G900 Single Cab (sold separately).
https://cults3d.com/en/3d-model/game/crawler-g900-single-cab-1-10-rc-body

The G900 Single Cab and G900 4x4 Expedition Suite combo works well with the VS4-10 Pro, SCX10 ii, SCX10 iii, TRX4, in both 313mm and 324mm wheelbase with the provided trail ready chassis mounts. The mounts also make installing and removing the body combination super easy, with just 4 screws.

The industry standard 313mm wheelbase gives this matching combination the perfect scale proportions, while maintaining its relatively nimble handling characteristics.

As the rear fenders can be shifted 10mm towards the rear, the TRX4’s 324mm wheelbase will also fit. Compensated side panels are also included, this will maintain the scale realistic look, while being able to utilise the benefits of the TRX4’s longer wheelbase.

Similar to the G900 Single Cab, the 4x4 Expedition Suite works best with 120mm diameter tyres, with outside tyre to tyre width of 220mm. A wider set of fenders are included for a more aggressive stance of 240mm in width.

Be sure to check out the instruction manual and gather all required hardware for assembly.

The G900 Expedition Suite comes packed with features and includes scale accessories to match the look.

  • 1/10 scale functional traction boards with storage mounts
  • Radio antenna of 2 different lengths
  • Fuel can
  • Small accessories box
  • Power socket cap with rain shield
  • Modeled air vents
  • Functional cab side blinkers for 3mm LEDs (4x orange)
  • Functional rear lights for 5mm LEDs (2x red 2x orange, 2x white)
  • Functional door with included hinges
  • Standard width and extra wide fenders (220mm and 240mm widths)
  • 313mm and 324mm wheelbase suitable (fenders can be shifted to fit)
  • Length compensated side panels are included to fit the 2 different wheelbases.

Please ensure your printer can print a volume of 210x220x175mm.

It is highly recommended to read the instruction manual before purchasing, to ensure you have all the required tools and hardware to assemble this body.

Assembly instructions:
View the link below to download the assembly instructions
https://www.aheadrc.com/manual

.DXF files for all windows can be found here:
https://www.aheadrc.com/dxf-files

Should you need any help, please do not hesitate to contact us!

3D printing settings

FDM printing:

Requires a printer that can print a minimum volume of: 210x220x175mm.

PETG filament
0.2mm-0.3mm (0.4mm nozzle) layer heights
20-30% infill density
Supports are necessary

Finished and assembled size:
411*220*216mm (All parts assembled excluding mounts)

Tags

Advertising

Issue with this design? Report a problem.
Check out similar designs

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi πŸ’œ.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.