BMO Dock for Cellphones

This is a cell phone holder in the shape of a BMO, it has a hole for you to place your cell phone and the screen is visible from the front of the character.

This model was made for a cell phone measuring 16.2 cm high, 7.7 cm wide and 1.1 cm thick, there is a model called "DO NOT PRINT!!!". - CELLPHONE REFERENCE MEASURES" that you can use as a reference to find the scale at home one of the axes (x, y, z) so that your cell phone fits perfectly, however I always recommend leaving a little slack in the thickness so that it is not too tight.

The back of the model is a hole to store things, such as the charger or headphones, and has some holes of 1 cm in diameter X 3 mm deep, in these holes you must place magnets so that the back cover is attached. It is advisable to use small and not very strong magnets in the upper holes so that the magnetic field of the cell phone is not affected, while in the holes below if you can use stronger magnets.

Finally I recommend gluing all the pieces with instant glue as they have some mm of clearance between the holes and the buttons and letters.

print all parts in the default print direction, as this is the way they achieve the best surface appearance.

Use large print heights and even if possible nozzles larger than 0.4 mm since the model has a considerable size, all this in order to decrease printing times.

Use supports, especially for files starting with BMO...