Set of models of Piggy and Boar with commercial license
More about license above 'Print settings' section
Models can be used as:
- toys
- phone holders
- keyrings
- earrings
Piggy and Boar are 40mm high
Keyring - 31mm (75% of original)
Earring - 19mm (47,5% of original)
Phone holders and lying version - 51mm long (61mm with a keyring addon)
Collection of free Piggy models and addons with noncommercial license
https://cults3d.com/en/design-collections/c47/piggy
Test them before you buy a license
Free models are with 'c47_3d' text on the bottom
NOTES
All models (excluding earrings and keyrings wich are only solid) are in two versions: solid and with holes
Piggy_holes is with holes for eyes that will fit 4-5mm (better closer to 4) of 1.75mm filament (best would be black)
Piggy-Boar_holes is with holes for both eyes (black 4-5mm) and fangs (white 5mm)
Filament for eyes should be cut streight. For fangs sth like a 45dgr angle
Models with holes may need infill (Prusa Slicer is automaticly adding bridges to support this)
Additionally there are files Piggy_ADDON_Eyes and PiggyBoar_ADDON_Fangs (and -phone versions) wich can be used to cover the holes or to use in multicolor printer
Merge it with base models
Phone holders
- Number on file names is thickness of phone in mm (6-16mm) - numbers are also on the bottom of models to show the size after print
- Angle 16°
- For horizontal or vertical placing of the phone. May not work for thick and heavy phones in vertical
The better fitted model to the phone the better chance it will not fall
For resizing phone models use the equasion:
‘Needed space (in milimeters)’ divided by ‘model number’ *multiplied by 100% = *'Needed model size in percent'
For example if you need more stable 16mm you can take 10mm version resized to: 16 / 10 * 100% = 160%
Phone holder - Keyring
- To make a Keyring use a model of your choice and add there a keyring addon (Piggy_Phone_Keyring-addon). Both models should be in the exact same position in your slicer to be sure that they will merge properly
Then select both models and merge them (right click menu)
Keyring models are with a 'frame', a flat surface that will not be printed. This way it is easy to set it in the right spot - Ignore model 'errors' and DO NOT try to 'fix' the model
After merging you can easly resize or rotate the model if needed
Piggy and Boar are with Lying version too, looks like phone holder but are without a holes for a phone
With this license you are authorized to:
Print — sell and distribute 3D prints of this 3D models and its adapted models for any use, including commercial use, in unlimited quantities;
Adapt — remix, transform and create from the digital files of the 3D model. For example you can add text or your logo to the bottom of model - as this models, in contrast to 'private use' models, are without 'C47_3D' text on the bottom.
What is not allowed:
No sharing of your 3D prints, nor adaptation of the 3D model without attribution.
No distribution, sale, donation or exchange of the digital files of the 3D model and the digital files of 3D models adapted from it.
If you will need any help with this models just write here or on my Instagram
If you want to sell just few prints or want to sell it for some charity you can write to me too - this refers to every models of mine
UPDATE 05 I 2024
Added versions for 6-9mm phones
Update 04 IV 2024
Optimized lying (phone) models (around 50% smaller size, should look the same after print)
Added versions with holes instead of eyes to use with 1.75 filament - you can also use eyes addon to print the models in multicolor. Boar_Holes is with both fangs and eyes holes
Added numbers on the bottom to phone models to show what size it is after print
Added ‘mm’ to phone models to avoid rare confusions
Phone keyring addon improved a little