Key beer stopper Celli

I have created a key to open the Celli beer stoppers more easily.

Since you have a hard time with pliers from time to time and I need this key for my job.

The time and prototypes I invested were created in my free time and at my own expense.

The key is free for private use.

               Code(100%): HAASE0815_PRIVATE-USE

If you want to support me you can use the following codes.

               Supporter (50%): HAASE0815_SUPPORTER


               Tip (90%): HAASE0815_CUP-OF-TEA

For commercial use and printing of up to 10 keys the price of 10€ applies

However, if you print as a company or more than one, please contact me to arrange an additional small donation in the form of filament or the like to cover part of my costs.

Thank you very much

Version 1.0 and 3.0 (black)

Quality: 0.02 is sufficient, at 0.01 there is no visible difference.

I made it to 30mm for stability, the 25mm seems to be enough, for larger hands I recommend the 30mm.

When slicing, please make sure that at least 80% infill has been selected.

Version 2.0 and 4.0 (white)

I have created a second one which can be used when the empty flow stoppers are connected with a hose.

Version 2 can be used with both beer stoppers, does not fit 100% but you have enough grip to loosen the nut.

Version 4 fits only slightly better.

My prototype with 80% infill cannot be opened 1 cm to 1.5 cm without any problems and without anything breaking.

          Please just try it out yourself and share your experiences, thank you

Infill: 80% (should be enough for use) I have also created some with 100% but it doesn't seem to be necessary.