Skip to content

Low profile GoPro Mount for Base GS Style Paintball Masks

20231107_181748.jpg Low profile GoPro Mount for Base GS Style Paintball Masks
20231107_181454.jpg Low profile GoPro Mount for Base GS Style Paintball Masks
20231107_181536.jpg Low profile GoPro Mount for Base GS Style Paintball Masks
20231107_180805.jpg Low profile GoPro Mount for Base GS Style Paintball Masks
20230929_195654.jpg Low profile GoPro Mount for Base GS Style Paintball Masks
Base_GSO_Gopro_Mount.stl Low profile GoPro Mount for Base GS Style Paintball Masks
Right_Retainer_Plate_GSO Mount.stl Low profile GoPro Mount for Base GS Style Paintball Masks
Left_Retainer_Plate_GSO_Mount.stl Low profile GoPro Mount for Base GS Style Paintball Masks
Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.
  • 734 views
  • 1 like
  • 1 download
License
3D design format
STL Folder details Close
  • Base_GSO_Gopro_Mount.stl
  • Left_Retainer_Plate_GSO_Mount.stl
  • Right_Retainer_Plate_GSO Mount.stl

Learn more about the formats
Publication date 2023-11-14 at 01:30
Design number 1576976
TemperedSteel32

TemperedSteel32

3D printer file info

3D model description

Note: Made for Base GS style Paintball masks (Base GSF, Base GSO)

Simple and sturdy three piece GoPro mount. Lenses can even be removed after installation!

Parts Needed:
– (4) M3 hex nuts
– (4) M3 screws (Pan and counter sunk heads both should work, length between 10mm to 16mm)
– (1) GoPro Mount screw and nut (M5 screw and nut are equivalents)

To install:

  1. Remove lenses
  2. Press in main mount print into top vents. Align so that the middle notch goes into the support fin of the mask
  3. Put two M3 hex nuts into each retainer plate. Align each plate with the corresponding holes in main mount from the inside of the mask. Parts should appear as pictured above (Last image)
  4. Screw in bolts from outside till hand tight. Don't over tighten screws in order to prevent vent bars from deforming
  5. Reinstall lenses. Mask may need to be slightly pulled apart in order to pass by certain screws

3D printing settings

Recommended to be printed with high infill and walls for strength. Supports should not be need for most machines.

Tags

Advertising

Issue with this design? Report a problem.
Check out similar designs

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi 💜.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.