Minecraft Portal night lamp with LED string

*
Updated with v2 files (pedestal_v2 and side_light_v2) with some modifications for better usage :) - but the original files are still here
I created a second version with RGBIC led string - it is bit better than the other one, however I can manage it only via Android or Iphone instead of physical remote control . The last 5 pictures shows the second version (but with the original side_light - the v2 version is "full" in the inner part ) - please upload a picture if you make it.. Thanks
*

My son requested a Minecraft nether portal but I'm not qualified enough to create a real one and I have not found any similar item so I made this one.

Created from normal and lithophane PLA
1 m multicolor led string is enough (check the picture)

1. Glue the frames and the light parts
2. Insert the LED into the base frame
3. Insert the LED into one side frame and glue the base and one side frame
4. Continue with the top frame
5. Glue the circle_back in the middle (bigger than the front part) The front part of the "lights" is a bit higher rim/edge!!!
6. Continue with the last frame
7. Fold back the LED string (42,5 cm) and tape it in the "inner" circle
8. Insert circle_front or circlewithman_front to the front (it is changeable anytime the upper and the lower parts hold it in place ) There is a small half-hole in the top so you can press the middle and pull out the whole part.

This is a fan-art so it's free ( non-commercial use) ;)

If you need help, or you have some ideas to improve the quality somehow please ping me.
Theoretically, should be better to use RBGIC segmented led string
to use different lights for the "portal" and for the "stones"
(I'll do one maybe, but I have a prototype only at this moment)

0.4 nozzle
0.2 layer height
10% support (check the picture)
I didn't use support for the small holes in the "stones"