Skip to content

Schleppkettenhalter für Tronxy D01 PLUS/Drag chain holder for Tronxy D01 PLUS

20231115_134949.jpg Schleppkettenhalter für Tronxy D01 PLUS/Drag chain holder for Tronxy D01 PLUS
20231115_135007.jpg Schleppkettenhalter für Tronxy D01 PLUS/Drag chain holder for Tronxy D01 PLUS
20231115_135110.jpg Schleppkettenhalter für Tronxy D01 PLUS/Drag chain holder for Tronxy D01 PLUS
Advertising
Share
Add to
Make
Advertising
?
Creation quality: 0.0/5 (0 votes)
Evaluation of members on the printability, utility, level of detail, etc.
  • 143 views
License
3D design format
3MF Folder details Close
  • Schleppkettenhalter Druckkopf.3mf
  • Schleppkettenhalter Motor Links mit Rippen.3mf
  • Schleppkettenhalter Motor Rechts mit Rippen.3mf

Learn more about the formats
Publication date 2023-11-15 at 13:24
Design number 1579725
BahamutWolf

BahamutWolf

3D printer file info

3D model description

Since the cable from the breakout board to the print head always wiggled around too much, I developed brackets to be able to use a drag chain. The drag chain is held at an angle by the two brackets that are screwed onto the rear motors so that the drag chain sags less. This set includes the drag chain bracket for the print head and the two motors. M3 screws of the appropriate length and M3 nuts are required. The drag chain holder of the print head also has 2 sockets so that an ADXL345 acceleration sensor with corresponding housing can be screwed on.

You can print the holders in PLA+, PETG or even better carbon. I've been using mine with PLA+ for several months without them breaking.

Since the cable from the breakout board to the print head always wiggled around too much, I developed brackets to be able to use a drag chain. The drag chain is held at an angle by the two brackets that are screwed onto the rear motors so that the drag chain sags less. This set includes the drag chain bracket for the print head and the two motors. M3 screws of the appropriate length and M3 nuts are required. The drag chain holder of the print head also has 2 sockets so that you can screw on an ADXL345 acceleration sensor with a corresponding housing.

You can print the holders in PLA+, PETG or even better carbon. I've been using mine with PLA+ for several months without them breaking.

3D printing settings

Material: PLA+, PETG

Hotend temperature: 215°C/240°C

Bed temperature: 60°C/80°C

Infill: 20% Gyroid

Resolution: 0.1

Tags

Advertising

Page translated by automatic translation. See the original version.
Issue with this design? Report a problem.
Check out similar designs

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi 💜.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.