Darwin's Journey + Fireland Expansion+ Mini Expansions Insert

English:

This is an insert for the retail edition of the board game Darwin's Journey, which can store the Basegame, the Fireland expansion and all mini expansions. I have been inspired by some inserts, but I have not been able to find one that can store the entire gameplay content. Even though the insert is a pretty tight fit, the lid closes almost flush (lifted at most 3-4mm). The insert is designed so that it can also store cards with thin to medium sleeves (tested with Paladin "Tristan" sleeves with a thickness of 90 microns). Since I do not own the Plastic Wax Seals, Realist Wooden Lenses and the metal coins, I did not take these into account when designing the insert. Under certain circumstances they could still fit. However, I have designed 2 additional trays which can be used instead of the two small card inserts. These create additional space to store other game content such as the Plastic Wax Seals and Realistic Wooden Lenses, but then all cards would have to be stored in the large card tray, which means that there is only enough space for non-sleeved cards.

German:

This is an insert for the retail edition of the board game Darwin's Journey, which can store the Firelands expansion as well as all mini expansions in addition to the base game. I have been inspired by some inserts, but I have not been able to find one that can store the entire gameplay content. Even though the insert fits quite tightly, the lid closes almost flush (maximum 3-4mm protruding). The insert is designed in such a way that it can also store cards with thin to medium sleeves (tested with Paladin "Tristan" sleeves with a thickness of 90 microns). Since I do not own the plastic wax seals, realistic wooden lenses and metal coins, I did not take them into account when designing. Under certain circumstances they could still fit. However, I have designed 2 additional trays that can be used instead of the two small card trays. These create additional space to store other game contents such as the plastic wax seals and realistic wooden lenses. Unfortunately, the solution does not come without a disadvantage, because if the two small card trays are replaced, all the cards would have to be stored in the large card tray. This means that there is only enough space for non-sleeved cards.

0.4 Nozzle

Layer height 0.2mm

No Support

No Brim (in case of warping issues, use brim)