Accurate Frisbee Bounces off walls TPU

This is better than any old frisbee. It is specially designed with the unique ability to bounce off walls just like Captain America's shield! Strategically placed grooves help it bend and spring off almost any surface and continue its smooth flight. Its airfoil allows it to glide smoothly through the air at both low and high speeds while still staying very accurate. Because it is soft and can bend and fold it would be much less painful than a regular frisbee if someone got hit in the face.

This is my go-to frisbee for Ultimate Frisbee, Frisbee golf, 500, or any other frisbee-related games or sports.

For best results when bouncing off walls, make sure you throw the frisbee so that it rotates in the direction so that it will roll with the wall.

The reselling and the giving away of this file is strictly prohibited.

I am not responsible for anything you do with this file.

Filament: OVERTURE TPU, 95A

Color: Any. I used yellow

Quality / Layer height: 0.2

Infill: 16%

Infill pattern: Triangles

Temperature: 228 c

Printing Speed: 20 mm/s

Support: No

Brim, raft, or skirt: No

Printer: Any capable of printing with TPU, and has a build volume of at least 205mm x 205mm. I used the Creality Ender 3 v2 with a small 3D printed upgrade.

If you don't know if your 3D printer can print TPU, I would recommend looking up if it can, and if it can't look up how to upgrade it to be able to do so. please note that lots of people will say you need to switch it to a direct drive, but this is not always the case.