Flappy / Powie / Poward / ポワルド (Rockman.EXE / Megaman Battle Network)

Flappy-Virus from the Megaman Battle Network series*

• Two versions - Normal and Attacking
• Normal version consists of 7 parts
• Attacking version consists of 5 parts
• Easy to assemble (requires glue) and created with painting in mind

Splitting the model into multiple parts makes the painting a lot easier and prevents annoying sessions of masking

• Created for resin printers (though, fdm printing should work too, but would probably need some scaling)
• Contains pre-supported parts

Dimensions - Normal version
88 mm x 110 mm x 49 mm (Height x Width x Depth)

Dimensions - Attacking version
102 mm x 121 mm x 75 mm (Height x Width x Depth)

Regarding the supported version of attacking powie
Because of the pretty big proportions of the attacking powie the provided supported parts are scaled down to 75%. However, the unsupported parts are at their 100% size.

Random Advices
For glue I used Pattex Perfect Pen. I painted the model using Vallejo Acrylics and AK Interactive Acrylics. Panelline-Washes were done using random dilluted enamels.

!Attention!
I plan to release this model along with some other models in a bundle in the future (no date yet). On that bundle you'll be able to save a few cents... just want to be upfront bout this

All files provided are in stl-format

Made for resin printers and tested on a Anycubic Photon Mono M5S with Jayo Standard Resin, Jayo ABS Like Resin and Sunlu Standard Plus Resin with a 0.03 layer height.