Vanquish VS4-10 Fordyce / Phoenix Truck Bed

This is a direct replacement to change the the stock cage on the VS4-10 Fordyce to a Truck bed with working tailgate. Notes on Phoenix Fitment below.

Design Details:

• Working Tailgate with latches
• Designed-in Light buckets in location that allow for mounting stock Bezels and accept LED's.
• Uses hidden Body clip location
• Uses Stock mounting bolts to Cab.
• Tailgate matches Bed side profile
• Cutout for stock shock location.
• Adding mounting holes on Bed rails for other features!
• Works directly with this adventure rack: https://cults3d.com/en/3d-model/game/vanquish-vs4-10-fordyce-phoenix-adventure-rack

Changes required for mounting:

• Remove Fuel cell cover for clearance to truck bed

Hardware required:

• 6x M3x8 (or 6) button heads to mount the hidden body clip parts to truck bed. -The tailgate hinges using 2 Long M2's, but if you open up the hole just in the bed slightly, you could also use a piece of 1.78 filament, just make sure the piece (or pieces if using one per side) are long enough that the lexan bed side keeps it from falling out, and bend the end so it can't get stuck in side.
• All other hardware is used from the stock configuration!

Phoenix Fitment:

You will have to trim the back of the cab flat, and possibly eliminate optional Dig Servo, but that is To be confirmed and depends on servo size.

See Images for orientations and support placement.

Bed: .3mm Layer height, 3 perimeter, 20% fill
Gate, Mount pin, mountplane, and latches: .25mm Layer height, 3perimeter, 20% fill