Horizontal Axis wind Turbine (HAWT)

This little wind turbine called "Zuki " is a design made by my renewable energy engineering knowledges. The blades are designed by aerodynamic no wake rotational equations for best lift coefficient.... Try to learn with her, go hard into the sky and create her, bring her to life.

An army of she... 💜🌱🌙

This small wind turbine named "Zuki" is a design realized by my renewable engineering knowledge. The blades are designed by aerodynamic rotation equations without wake rotation to obtain a better lift coefficient.... Try to learn with it, take the sky hard and create it, bring it to life.

An army of it... 💜🌱🌙

-We recommend scaling the paddles to your liking in other applications.

-Designed for high RPM motors, without the use of a gearbox. Try different pitch grades.

Blade parameters: Wind speed: 4-7 m/s and more. Pitch: 0 degrees. Alpha: 3 degrees. CL. 1.05.

Profil: SG 6043

Do you want a special blade design with the wind conditions at your home? Write me to study the potential and design it under your atmospheric requirements.

-PLA, PETG, ABS, carbon fiber, resin.

-BLADES:0.12 layer height test low print speeds.

-Other parts can be printed at 0.2 layer height and 50mm/s.

-HUB and gondola : With supports

-BLADES: Without brackets

-Bearing 22 mm Abec 7

-Bearing 17 mm Abec 7

-Bond the drive train to the hub and bearing on the inside of the circumference. Without the hub and gondola being threaded.

-Use a toothpick to connect the gondola and steering vane.