TARGET PRACTICE PELLETS/SLUGS - CAL .680 - PRECISION PLUS - BB METAL CORE

3D PRINT PELLETS CAL .680 PRECISION PLUS

THIS ARE TO BE USED ONLY FOR PRACTICE !

BEFORE PRINTING, ASSEMBLING AND USING THIS PELET, I STRONGLY RECOMMEND TO CHECK THE RULES AND REGULATIONS IN YOUR COUNTRY, REGARDING PROJECTILES WITH A METALLIC CORE! KEEP YOURSELF OUT OF TROUBLE!

VERSIONS "A" WITH 9 AND 10 MM BB

PELET .686 PRECISION PLUS - WITH 9MM BB - WEIGHT 4.43GR WAS TESTED... AND IT WORK GREAT WITH MY VALKEN M17 - EQUIPPED WITH ORIGINAL BARREL.

IF YOU ARE LOOKING FOR A SUPPRESSOR FOR YOUR VALKEN M17, PLEASE HAVE A LOOK:
https://cults3d.com/en/3d-model/game/suppressor-215-and-245-gas-relief-delay-front-relief-extra-chambre-paintba

IF YOU ARE LOOKING FOR A WAY TO CONNECT A LASER POINTER TO YOUR GUN... PLEASE SEE BELOW!
https://cults3d.com/en/3d-model/game/valken-m17-laser-pointer-connector

PELLETS WITH THE FOLLOWING DIAMETER ARE INCLUDED: .680, .681, .682, .683, .684, .685, .686, .687, .688, .689, .690.

SINCE THE PRINT RESULT MAY VARY FROM PRINTER TO PRINTER, AND SOME TIME... FROM FILAMENT TYPE TO FILAMENT TYPE... WHEN WE ARE TALKING ABOUT A SMALL DIFFERENCE... START BY PRINTING THE "CENTERED" VERSION ... SEE HOW IT FIT IN TO THE GUN BARREL... THEN PRINT A BIGGER (+) OR A SMALLER (-) VERSION OF THE PELLET... TEST WHAT FIT BETTER!

AS A REFERENCE AND AN EXAMPLE... MILSIG/VALKEN RIFLED BARREL M17 CQMF HAVE A BORE OF .689IN
GO TWO OR THREE INCREMENTS BELOW, RESPECTIVELY TO .686 OR .687; PRINT THE PELLET... AND TEST IT! INCREASE OR DECREASE ACCORDINGLY!

BE AWARE THAT AFTER THE BB INSERTION THE PELLET OUTSIDE DIAMETER WILL INCREASE ! TEST WITH BB ON POSITION FOR FINAL SELECTION!

ALWAYS KEEP THE SAME BATCH IN TO A LABELED CONTAINER. BEFORE SHOOTING ALWAYS PERFORM THE BARREL TEST... WHERE YOU TEST THE CLEARANCE OF THE PELLET WITH THE DISMANTLED BARREL.
THE LABEL SHOULD STATE THE DIMENSION AND WEIGHT OF THE PELLET, AND THE BARREL DIMENSIONS YOU TEST IT WITH - IF YOU HAVE MORE THAN ONE BARREL!

A PERFECT PELLET WILL NOT PASS WARBLING AND WILL NOT GET STOCK. IF YOU MANAGE TO BLOW IT AS A BLOWDART... LOOKS LIKE YOU HAVE A WINNER! TEST DIFFERENT BATCHES... USE WHAT FEEL PERFECT FOR YOU!

DO NOT REUSE DAMAGED PELLETS, RECOVER THE BB AND REUSE IT ON A NEW 3D PRINTED UNIT!

TO EASE THE ASSEMBLY PROCESS, A SET OF TOOLS ARE AVAILABLE !
USE A RUBBER HAMMER... DO NOT USE EXCESSIVE FORCE!
USE EYE AND HANDS PROTECTION! (PPE)

WHEN TEST AND USE THE PELLETS... USE PROTECTIVE EQUIPMENT!

PELLETS CAN BE PRINTED WITH ANY TYPE OF FILAMENT; HOWEVER, IF PRACTICING IN AN OPEN FIELD, USING A BIODEGRADABLE FILAMENT IS STRONGLY RECOMMENDED

WARNING!
THOSE ARE SMALL PARTS AND REPRESENT A CHOKING HAZARD! KEEP AWAY FROM CHILDRENS!
ALWAYS USE EYE PROTECTION! USE ONLY FOR PRACTICE! DO NOT USE AGAINST OTHERS!

COLLECT USED PELLETS... DO NOT POLLUTE!

THE ONE PRINTING THE PELLET IS ENTIRE RESPONSIBLE FOR ANY INCIDENT OR ACCIDENT RESULTING FROM USING THIS DESIGN. WE DO NOT ASSUME ANY RESPONSIBILITY!

BE RESPONSABILE! DO NOT TAKE ANY RISKS!

This KIT is for personal use only! Please read our policy! If you do not agree, please do not buy this product! Failure to comply with our policy will result in the immediate termination of your user license! Do not alter or modify to resale, share with others, make it public or redistribute in any form, digital or in physical form, all digital content as images, dxf, stl files, etc. Do not sell, share, makes it public or redistribute as it is in current form. Do not sale the final product! You will need a Commercial License in order to sell this final Product! For a commercial license please contact us!

Thank you for your interest in our product!

Stay safe, be safe and be happy!

DESIGN TO PRINT WITHOUT SUPPORT! BY COSTA!

DESIGN TO PRINT WITHOUT SUPPORT.

PARTS WERE PRINTED USING BAMBU X1C PRINTER... WITH BASIC SETTINGS.

.685 PRECISION PLUS - WITH 9MM BB IT - WEIGHT 4.43GR

CLEAN ALL PRINT GLITCHES BEFORE USING!

PELLETS CAN BE PRINTED WITH ANY TYPE OF FILAMENT; HOWEVER, IF PRACTICING IN AN OPEN FIELD, USING A BIODEGRADABLE FILAMENT IS STRONGLY RECOMMENDED

USE OF GLUE IS NOT REQUIRED, ALL BB ARE PRESS FORCED ON POSITION, USING THE SPECIAL DESIGNED TOOLS!

PELLETS REQUIRE 9 OR 10MM STEEL BB