The Element RC Knightwalker detail pack set includes everything you need to and more scale detail to the Knightwalker. The parts are designed to be a direct fit to the Element RC Knightwalker 1/10 scale RTR (sold seperately). Parts include an interior, front and rear inner fenders, magnet mounts, extended rock rails and a rear mounted radiator.

For a full list of parts included with this purchase Click on "Object Parts" below.

For the magnet mounts you will need to use shoe goo or E6000 (sold seperately) to glue the magnets and magnet mount plates in place. You will need to use these magnets for best results (sold seperately):

1/2 x 1/4 x 1/8 Inch Strong Neodymium Rare Earth Ring/Donut Magnets N48 (20 Pack) Link:

totalelement.com/products/1-2-x-1-4-x-1-8-inch-neodymium-rare-earth-ring-magnets-n48-20-pack

Installation steps.
1. Install replacement body posts into the chassis. Short in the rear, long in the front.
2. Using Shoe Goo or E6000 glue one magnet to the top of each body post.
3. Place a second magnet on the top of each body post and lightly scuff the top surface of the magent
4. Using Shoe Goo or E6000 glue the mount plates on top of the magnets. Be sure to fit the Front and rear mount plates in the right location and have the top of the text towards the front bumper.
5. Once dry, apply more Shoe Goo or E6000 to the top of the mount plate and then place body in the dersired location.
6. Allow to glue to fully cure overnight before removing body for the first time.
7. Magnets should now be mounted firmly to the underside of the body.

To see the install in action, check out RC Girl's how to video below (6.31 mark):

https://youtu.be/7OSDLiclFns