this is the NW64 mag so this one to be clear doesn’t fit in a regular P90 pouch. these mags are 64mm wide. But they will fit in paintball pouches like the dye tactical locking pod pouch. and maybe some more that I will add on the list if I’m aware of them.
What is the idea behind creating the NW64 mag series.
the fallowing reasoning is mostly based on the 68 cal version. since I did not had a wide spectrum of 50cal paintballs to do a lot of test’s but the conclusions is basically the same. however the 50cal in comparison to the 68 cal already had a larger bend on the inside so that should have helped. how ever the larger mag did also feed T4e tracer rounds where as with the normal mag this was a bit of a tricky thing to do.
and not to forget in the 50 cal's case will it add 1 more round
The original mag have been improved a lot. But I did noticed that in some cases depending on what the bore size of the paintball was that it would get stuck at the bend of the mag. This could be fixed by half loading the mag. But this will of course reduce the amount of paint in your I looked at making a wider mag that is haves a more conventional curve going on so there is less friction at the bend of the mag. And this seems to work with basically any type of 68 cal paintballs, but rubber type of re-balls are still hard to use in these type of mags
this model is the OPEN mag version of the NW64. so you can add window in this mag so you can see how much paint is left.
Instructions:
you can get a bit of a impression with the Video.
but there is a updated PDF manual that goes with the download.
compatibility note:
this mag will not fit in any airsoft P90’s mag pouches
the RUNQI can’t work with this mag use the V23/N23 Classic model for that instead
the airsoft P90 builds are also not compatible with this NW64 series of mags
spring wise:
for the 50cal version is only 1 spring tested. that is the 2x 12mm OD, 0.6mm wire spring and 300mm long.
there will be a link added to 2 aliexpress stores where you can find those.
if there are more springs tested with some modded parts, then those will be updated to this download.
Video Links:
v23 mag vs n23 explained
https://youtu.be/SjI3vn4XrbQ
how to use the sand tool
https://youtu.be/EHuSJlFEFEw
UNW P90 how to build the v23 N23 and nw64 paintball p90 mag
https://youtu.be/EIYLX_CG7U8
UNW P90 MAG VS those... other paintball MAGS
https://www.youtube.com/watch?v=S-up50s3zvo
https://odysee.com/@UntangleWORKS:a/UNW-P90-MAG-VS-those-other-MAGS:2
UNW P90 mag assembly video
https://www.youtube.com/watch?v=eI5-sqQGx0I
https://odysee.com/@UntangleWORKS:a/UNW-P90-mag-assembly:b
UNW P90 mag assembly for the open mag version
https://odysee.com/@UntangleWORKS:a/UNW-P90-windows-mag:f
Video Links to mag options for this mount:
UNW P90 Project update: ESG Euro SuperGame 2022 after report
https://odysee.com/@UntangleWORKS:a/UNW-P90-2022-update-ESG-after-report:2
UNW P90: step by step mag function check (and a bit of a update)
https://www.youtube.com/watch?v=BqOoVJ2hh8s
https://odysee.com/@UntangleWORKS:a/UNW-P90-mag-function-check:b
The UNW P90 Hi cap mag or in other words a hopper adapter for the UNW P90
https://www.youtube.com/watch?v=A3yAlBoDHIg
https://odysee.com/@UntangleWORKS:a/UNW-P90-Hi-cap:b
UNW P90 Hi cap mag lid
https://www.youtube.com/watch?v=L9vtBMNIMkM
https://odysee.com/@UntangleWORKS:a/UNW-P90-Hi-cap-lid:4
UNW P90: Template ring for the P90 airsoft mags
https://youtu.be/kufvl5E0RiU
UNW P90: G11 styled tippmann Tipx mag adapter
https://www.youtube.com/watch?v=_U-nBrJH1hM
https://odysee.com/@UntangleWORKS:a/UNW-P90-G11:a
UNW P90 mag winder
https://youtu.be/v1cIc2swRdg
https://odysee.com/@UntangleWORKS:a/UNW-P90-mag-winder:9
UNW P90 mag winder ring
https://youtu.be/KMoFYRpW4_E
https://odysee.com/@UntangleWORKS:a/UNW-P90-mag-winder-ring-B:9
UNW P90 mag speed loader
https://youtu.be/lVzFHDjsehg
https://odysee.com/@UntangleWORKS:a/UNW-P90-mag-speed-loader:a
UNW P90 mag speed loader bumper
https://youtu.be/4S5K_jraJXI
https://odysee.com/@UntangleWORKS:a/UNW-P90-mag-speed-loader-bumper:6
materials needed:
the linkable links can be found here:
parts list for the UNW P90 mags
https://drive.google.com/drive/folders/1Lexoj0ui0QVjEvqDVL4aBHUPyZCzu_aY?usp=sharing
mag tail:
4x Nindejin (aliexpress store) cross round head phone classes screw: M1.4 ,10mm long screws
mag head:
4x Nindejin (aliexpress store) cross round head phone classes screw: M1.4 ,10mm long screws
slide:
1x Spring 4mm OD, 0.3mm wire, 15mm long
clicker:
1x M2 bolt 12mm long
1x spring 4mm OD, 0.2mm wire, 10mm long
Spool:
1x M3 bolt 22mm long
Main spring:
2x MSC helix roundball spring
OR
2x 12mm OD, 0.6mm wire 300 -/+ springs (links and stores are in the download)
wire: 4 strands braided fishing line PE, 0.26mm / 31LB
1x 1.0 x40mm heat shrink tube
window: PVC binding cover 0.2mm thick.
