Skull Stand Playstation 5 DISC edition
$3.65 Skull Stand Playstation 5 DISC edition
Published 2023-12-01T13:13:33+00:00
Print-in-place
No Support Needed
It's only for the PlayStation 5 Disc Edition.
Not the PlayStation 5 Digital Edition.
Check my designs for other consoles
Super easy to print in any color to go along with your TV setup!
The model was carefully designed to insert the Playstation 5 like a glove. It is a proper stand; your PlayStation won't fall when docked.
The design does not block AirFlow. The PlayStation 5 sucks fresh air from the front and blows the hot air at the back. I added a security indent on the bottom, just in case.
There are 2 parts.
You need a minimum build volume of 22x22x22cm
No support at all; just deactivate them.
I recommend some infill (printed with a Giroid pattern at 10/15%)
Make sure you do not have any elephant foot to link the 2 parts properly.
IMPORTANT NOTE:
Please note that a Creative Commons Non-Commercial License protects all of my designs on MyMiniFactory Store. This means that you cannot sell 3D prints based on my designs. Thank you for your comprehension.
Happy printing!
• No support is needed to print this dock. Everything is Print-in-Place.
• Layer Height 0.2mm
• Nozzle 0.4mm
• Recommended infill 15%.
• Recommended Infill Pattern: Gyroid or Cubic
Date published | 01/12/2023 |
Price | $3.65 |
Support Free | YES |