Inner Fender for FMS FCX18 LC80

A lightweight(about 12g/pcs) full front and rear wheel fender with side skid makes your FCX18 LC80 chassis look awesome!

It only designed for SwingRC LCG Shock Mount below, NOT directly compatible for stock shock tower.
https://cults3d.com/en/3d-model/game/fms-fcx18-lcg-shock-mount-swingrc

Please upgrade FMS FCX18 LCG SHOCK MOUNT by SwingRC first, thank you!

Get a FCX18 LC80:
https://www.fmshobby.com/en-kr/products/fms-1-18-fcx18-lc80-toyota-land-cruiser-80-rtr?ref=Gu8gzLpI58eKYw

https://www.facebook.com/groups/swingrc/

[ Test Run Video ]
https://youtu.be/Ob81djxvCEc

Print with PLA/PETG.

We provide a anti-wrap version stl for you if you have any wrap problem.

Tips for Pefect Slicing in Cura:
1. Add anti-wrapping objects at the thin wall corner with Tab Anit Wraping or Tab Plus shown as FCX18-InnerFender-AntiWarp.stl
2.Support Line Width and Support Interface Line Width: 0.2mm
3.Bottom Pattern Initial Layer: Concentric
4.Connect Top/Buttom Polygans: checked
5.Enable Ironing: checked / Iron Only Hightest Layer: unchecked
6.Infill Density: 20% / Connect Infill Lines: checked
7.Build Plate Temperature: 55~60
8.Print Speed: 30mm/s , Initial Layer Speed: 20mm/s
9.Support Placement: Everywhere ; Support Overhang Angle: 70;
10.Support Pattern: Zig Zag
11.Support Density: 8% ; Support Wall Line Count: 0
12.Support Z Distance: 0.2mm; Support X/Y Distance: 1mm
13.Support Interface Density: 40%
14.Outer Wall Wipe Distance: 5mm; Print Thin Walls: checked
15.Combing mode: Not on Outer Surface
16.Avoid Printed Parts When Traveling: Checked
17.Keep the interface line and the bottom fill line perpendicular to each other, not parallel.

Addtional parts:
- M2 10mm screw bolts x 4