Zenless Zone Zero - Koleda Belobog Wrench

This model is designed for Koleda Belobog cosplay from Zenless Zone Zero.

It is the wrench that she holds in her right hand. This model has no function other than a simple cosplay prop. It doesn’t work as a tool.

The model is cut into parts and pieces to fit in a printer with a platform size of 200mm x 200mm x 200mm.

There is a picture with parts labeled to their file names in the preview section which you can refer to.

I include the uncut version as well just in case you need it.

There are tunnels with diameters of 10mm punched on the model for alignment and bone installation purposes. You can use anything with similar dimensions or print the included "peg" file, a cylinder with a diameter of 9.5mm.

The proportion of the model is set as close as possible to replicate the in-game design. This makes the upper portion to be thicker. If you are worried about the weight, you can try to print it with infill as low as possible. However, the default overall size is set based on a model with a height of around 165cm. If you need it to be shorter or smaller, you can scale it yourself using any slicer of your choice.

Please note that there are "acc" which need some attention for installation. You can check the picture in the preview section to have a better understanding.

To increase the length of the overall prop without increasing the size of the other parts, you can scale the length of the pole or print multiple copies of it.

For scaling, please use the same scale for all the parts and pieces.

Cheers and Happy Printing!

Dimension: 1006.66mm x 549mm x 76.74mm