Dog whistle Rhodesian-Ridgeback - head motif-

Dog whistle - Head motif - Rhodesian Ridgeback

Sound is similar to that of a standard buffalo horn whistle

3D model file

High polygon

Dimensions:

Pipe: Length 7o mm , Diameter: 17mm

Total with bowl and ring approx. 110 - 120 mm, depending on bowl

The model can be purchased for commercial purposes for resale, exclusively as a printed model via the commercial license. Please note that the 3D print file may not be modified without prior consultation with us (Qu3D 3D-Design Art). Furthermore, the sale of the 3D print file is not permitted and is subject to license law. You can select this option when purchasing the model.

---

The pipe can be printed in variations as follows:

Pipe with thread for connecting the intermediate ring for a different color and mounting the head

Pipe with thread for connecting an end piece for a different color without mounting the head (only the pipe)

The following parts and files are included:

Pipe with thread (DOG-Whistle-Ridgeback-WHISTLE-HOLE.STL)

Whistle without tape hole (DOG-Whistle-Ridgeback-WHISTLE.STL)

Intermediate ring for mounting the bowl (DDOG-Whistle-Ridgeback-CUP-RING.STL)

Connector for mounting the head (DOG-Whistle-Ridgeback-WHISTLE-PIN.STL)

Head without tape hole (DOG-Whistle-Ridgeback-Head.stl)

Head with ribbon hole (DOG-Whistle-Ridgeback-Head-Hole.stl)

End with screw for pipes without head (DOG-Whistle-Ridgeback-CUP.stl)

DDOG-Whistle-Ridgeback-RING.stl

Notes on the production:

The holes for the bands in the pipe can be either in the head or in the pipe, depending on what you print and then mount.

Important notes!

Supports are only needed for the heads (only a few). Our tip: only place light tree supports on the print bed!

VERY IMPORTANT! Print all parts with 100% infill and set a concentric pattern for the pipe and components.

Assistance

Detailed help for printing our models

Designing the eyes

Further helpful learning videos

License information:

These files are available under the "Royalty-Free License". This means that printed or otherwise created versions of this model may not be used or sold for commercial purposes.

If you wish to use the model commercially, you can purchase a corresponding license for commercial use by ticking the corresponding box for commercial use at the time of purchase. Passing on the STL files is not permitted.

Watermarks and changes:

The original STL file and modified versions may not be changed or sold as they are protected with a digital, invisible watermark.

If you wish to make changes to the model, please contact the designer, Bernhard Queißer, from QU3D in Germany. He is open to a dialog and will be happy to discuss your change requests.

Design + Copyright: Bernhard Queißer

QU3D.de

Country of origin: Germany

Assistance with printing our models in German

https://www.qu3d.de/support

Assistance with printing our model.

https://www.qu3d.de/support-en

Design of the eyes

https://www.qu3d.de/supportgestaltung

Further helpful learning videos, e.g. on the topic of supports

https://www.qu3d.de/videos