Kawaii Cat with a Planter Box
$2.10 Kawaii Cat with a Planter Box
3D
Published 2023-12-04T22:24:06+00:00
Kawaii Box with a Playful Cat Plant Holder
This adorable cat will try to reach out to the plant in the cardboard box. Can't be cuter than that!
Guaranteed 100% Kawaii! (✿◠‿◠)
There are two different boxes. One with drainage holes and one without.
Use a point of glue to insert the face elements of the cat.
IMPORTANT NOTE:
Please note that a Creative Commons Non-Commercial License protects all of my designs on MyMiniFactory Store. This means that you cannot sell 3D prints based on my designs. Thank you for your comprehension.
Happy printing!
To get the best out of the STL file, please follow these guidelines:
• Layer Height 0.2mm
• Supports are needed!
• Nozzle 0.4mm
• Recommended infill 20%.
• Make sure your bed is correctly leveled. Then check again :D
• Try to hide the seam and place it where nobody will pay attention.
• Make sure your printing temperature and bed temperature is adequate for the filament you are about to use
| Date published | 04/12/2023 |
| Price | $2.10 |