Shatterpoint Ladder Hooks (low profile, with options)

After printing the ladder hooks from thing 6061262 (https://www.thingiverse.com/thing:6061262), I found that I wanted to add some modifications to them so they better suited my needs.
So I designed my own "low profile" ladder hooks from scratch. They were designed to be resin prints, I have no idea how they would turn out with filament.

The idea is that i wanted to be able to use the few millimeters you have on the edge of the platform, right above the ladder, to place my minis without having to work around big handles.
I also wanted the option to remove the ladder hooks, for whatever reason, so I put 2 2mm holes on each side of the hooks in order to magnetize them.
And I spent a lot of time designing them so they would fit the aesthetics of the rest of the terrain.

In this thing you can find 2 versions of the ladder hooks :
-- Ladder_hooks.stl, which is a version where the 2 hooks are linked together, which is the version I prefer and designed first, before I figured I had to add supports to print it (Ladder hooks - Supported.stl is the STL file with supports that you can print).
-- Ladder_hook_R.stl and Ladder_hook_L.stl, which is a version where the 2 hooks are separated and that can be printed flat, without supports.

-- Magnet_holes_guide.stl is only needed if you want a guide to the specs of the ladder hooks to perfectly align the magnet holes on the ladders and the thing.