Lucky owl VORONOI style greeting with lamp possibility

Lucky owl in voronoi style with greeting text
There are 2 STL versions, one Italian and one English.
Why does the owl bring good luck? The idea of the owl as a lucky animal has its roots in ancient times and,
To find its origins, we even have to investigate Greek mythology.
The Ancient Greeks, in fact, considered it as a bird sacred to Athena,
The goddess of wisdom, strength, war, and the arts.

Owl 22cm tall but customizable in the slicing phase, with the possibility of adding a lighting lamp inside,
as it is equipped in the base passage for the electric wires. If you want, you can place it
high above your head.

This Voronoi-style workmanship, the addition of the greeting text and the passage through
the electric wire of a lamp in the base, were created by me with specific 3D software.

The STL version: Gufo-lamp-VORONOI-220mm is the original and has not been shortened.

WARNING: The images refer to the normal version.
If the slicer reports a stability error, you can ignore it.

Any reproduction for commercial purposes is prohibited.

Printer: Ender 3 - Ender3 S1 PRO
Slicer: Prusa Slicer 2.3 ( or 2.6.1 )
Nozzle: 04
Layers: 02
Nozzle temperature: 230°C
Bed temperature: 50 - (70 petg S1 PRO)
Filament: PLA Sunlu Carbon fiber - PETG Sunlu Red
Flow: 1
Supports: NO
Top and bottom solid layers: 4 or 6
Perimeters: 2 or 3
Retraction: YES (Z-0.2 by 5mm) but it's much longer, try NO for more fast or set the retraction without the Z-hop
Speed: 40mms
Fill: 0%
Fan: 100%