3D model description
Insert compatible with the board game Pandemic by Z-Man Games (CZ - Blackfire/MindOK). Insert accommodates:
- Pandemic: Base game
- Pandemic: On the Brink
- Pandemic: In the Lab
- Pandemic: State of Emergency
- Pandemic: Promo Roles
The insert is designed to fit all large expansions, but please note that it is not anymore really possible to fit all things in just one box. If you don't mind a small lid lift (1 cm) then you can fit everything in one box, otherwise, I recommend using a second box for the boards.
Insert is also designed for sleeved cards. Because of space savings, they fit tightly into card holders, if the cards are not sleeved they will be loose.
Printing guide (what to print):
- 1x - PAN_pills_box
- 1x - PAN_pills_box_cover
Choice of variants:
if you have English version of the game (Z-Man version) then print:
- 1x - PAN_EN_cards_1
- 1x - PAN_EN_cards_2
- 1x - PAN_EN_cards_3
- 1x - PAN_EN_cards_4
- 1x - PAN_EN_cards_5
if you have Czech version of the game (Blackfire/MindOK version) then print:
- 1x - PAN_CZ_cards_1
- 1x - PAN_CZ_cards_2
- 1x - PAN_CZ_cards_3
- 1x - PAN_CZ_cards_4
- 1x - PAN_CZ_cards_5
I noticed that within different game releases, there is a slight size difference in Pandemic: State of Emergency transparent disks component. Please check before printing and choose the right variant. In addition, if you don't have a large enough print area, then print two parts of the insert separately and possibly glue them together.
insert with Z-Man size of transparent disks:
or
- 1x - PAN_EN_insert_part_1
- 1x - PAN_EN_insert_part_2
insert with Blackfire/MindOK size of transparent disks:
or
- 1x - PAN_CZ_insert_part_1
- 1x - PAN_CZ_insert_part_2
if you have all the expansion you will have additional 24 purple desese cubes. This can be stored under a pill box. To separate the pills box from the purple cubes you can print one of the following versions of the separator. If you get rid of additional purple cubes, print just variant 2 to fill the space.
- 1x - PAN_cube_cover_variant_1
or
- 1x - PAN_cube_cover_variant_2
3D printing settings
Insert was printed and tested with Prusa printer MK3S, PLA, 0.4 nozzle,h 0.2 step height, infill 15%, supports needed for card holders, no brim.
Printing time and filament use:
- PAN_cube_cover_variant_1 - printing time: 9m - used filament: 1g
- PAN_cube_cover_variant_2 - printing time: 22m - used filament: 3g
- PAN_CZ_cards_1 - printing time: 4h 18m - used filament: 35g (with supports)
- PAN_CZ_cards_2 - printing time: 2h 13m - used filament: 18g (with supports)
- PAN_CZ_cards_3 - printing time: 2h 12m - used filament: 18g (with supports)
- PAN_CZ_cards_4 - printing time: 4h 16m - used filament: 35g (with supports)
- PAN_CZ_cards_5 - printing time: 5h 40m - used filament: 46g (with supports)
- PAN_CZ_insert:
- PAN_CZ_insert_part_1 - printing time: 11h 7m - used filament: 120g
- PAN_CZ_insert_part_2 - printing time: 4h 25m - used filament: 45g
- PAN_EN_cards_1 - printing time: 4h 18m - used filament: 35g (with supports)
- PAN_EN_cards_2 - printing time: 2h 13m - used filament: 18g (with supports)
- PAN_EN_cards_3 - printing time: 2h 12m - used filament: 18g (with supports)
- PAN_EN_cards_4 - printing time: 4h 16m - used filament: 35g (with supports)
- PAN_EN_cards_5 - printing time: 5h 40m - used filament: 46g (with supports)
- PAN_EN_insert:
- PAN_EN_insert_part_1 - printing time: 10h 51m - used filament: 112g
- PAN_EN_insert_part_2 - printing time: 4h 25m - used filament: 45g
- PAN_pills_box - printing time: 13m - used filament: 2g
- PAN_pills_box_cover - printing time: 10m - used filament: 2g