Gen8 Errant Space Knights - Assault Team Pistols [Pre-Supported]

A smaller release this time, just a range of pistol options designed to match my Errant Space Knights, although you can easily use them with any other models too.

Planning to follow these up with expanded melee weapons, and some bits to make jetpack troops. Just figured these might be useful to people who don't want the other stuff, so uploading in smaller less costly packs.

If the arms you're using have a flat join, it should be very easy to just file or cut down the balljoint, depending on what resin you use. I scaled the balljoints I used to match ball-socketed arms from other big creators, so you can probably use these with a lot of stuff out there with no modifications needed. Obviously they fit the arms from my other kits too!

Pre-supports provided in STL and .lys format.

Provided with and without hands.

Contains the following parts (see images for details):
8 x Pistols without hands
8 x Pistols with hands

Update 11.01.2023 - Added a set of arms to hold the pistols, and a drum magazine bolt pistol.

Your mileage may vary, but I had success printing these supports on a Saturn 2, with a 30um layer height at 2.6s exposure. Used a 10:1 mix of Siraya Navy Grey : Siraya Tenacious.

Strongly recommend calibrating your printer yourself though, even if we have identical setups you may have different environmental factors, different quirks to your printer, different ambient temperatures, etc.

Let me know if the pre-supports give you any trouble and I will try to help!