Expansion package for AMS STAND Bambu Lab build plate Garage for 10 plates

Expansion package for AMS STAND
Bambu Lab build plate Garage for 10 plates

ATTENTION! be aware that you are only buying the storage part, the stand for your AMS must be purchased separately. This is an expansion pack and not a complete set.

Please read my description before you buy my designs, especially if you want to add expansion packs, you must be sure that you buy the right expansion packs, and it appears in my description what goes together

Without visible screw holes on the outside.

You can use my 3MF file prepared with my settings, ready to print. There is also the option of a stl file, but you have to make your own setup there.

Use a good pair of long nose pliers and a screwdriver to remove the support in the various holes, give yourself plenty of time to remove the support quietly to avoid scratches

If you use my 3MF file then don't change the settings, don't change the speed, this design is a precision design and we work within 0.2mm

This garage fits these models:
https://cults3d.com/en/3d-model/tool/ams-stand-with-pull-out
https://cults3d.com/en/3d-model/tool/ams-stand-v-2-exclusive
https://cults3d.com/en/3d-model/various/ams-stand-infinite-composition-possibilities But only the model called 1X2

Assembly instructions
https://www.youtube.com/watch?v=hk7Blk55UYA

3MF file contain the settings that I recommend, be aware that support is set up to be PVA while the print itself is PLA, if you do not have the option, you must remember to change the support settings.

Instead of PVA, it is also possible to use PETG as a support

In the videos you find a link to below, this text is only to demonstrate what the meaning is. This is not the model seen in the video.

I also recommend adding PETG or PVA as support, this gives a very precise hole for the joints. watch my video how to do this. access video here! https://www.youtube.com/watch?v=Lf1iQYXnVdU