Articulated Shenron Dragon Toy

THIS FILE ONLY OPENS IN BAMBU STUDIO.
To open in other slicers, use Printables "Prusa" files: https://www.printables.com/model/671447-articulated-shenron-dragon-toy

This Shenron model comes in two sizes; short, and long. The short dragon has 12 joints down its body, the long has a whopping 31 joints!

The whiskers are just strips of filament that I have glued into the holes on the side of the muzzle, a filament size of 1.75mm fits in the holes nicely.

I printed mine without a brim; providing your hotbed is clean/freshly glued, you shouldn't need a brim either. Supports are not needed for this model; do not use them or the model can break when you remove it from the supports!

Be aware that the long version of the model gets VERY close to the plate edges, so you won't be able to make this model any larger. I wouldn't print it any smaller as the joints will likely lose strength.

Pre-painted/coloured versions are also available!

The joints can move in almost all directions, though the hips have the least movement. The arms and legs do not move.

You can see the range of movement in the video (check the picture area).

This file covers PERSONAL use. If you want to sell prints of this model, please subscribe to my Patreon: https://www.patreon.com/thomastedwards

Made for use on Bambu Studio slicer; .3mf SHOULD be universal, but I know for certain this file does not open in Prusa Slicer.

All prints were done using PLA filaments. The file only operates on PLA settings, but you can modify them in Bambu Studio to PET-G, ABS, ASA .etc

https://youtu.be/gyW1gvRe94c