Android vs Apple

Hi friends, today on my profile, I wanted to bring the android robot that crushes apple, for all android lovers, I hope my apple friends don’t get offended, it’s just to laugh with something cute.

The andorid is about 12cm high including the base, each piece is divided so you can print it as you like, it does not have to be green, and so I preferred to put every single piece in stl.

If you don’t find one of the logos you love in my profile, contact me in the message section, I will be happy to work on it, and post it here on my profile.

I also want to remind you that almost all my projects are interlocking, and have a tolerance ranging from 0.30 to 0.40mm, depending on the project I go to work, I apply the right tolerance "tolerance standard of all printers"If you, like many others, don’t know what tolerance your printer has, I suggest you download my tolerance test, you can find it on my profile.

As always I want to thank you for spending your time viewing my project, and if you find it interesting, I suggest you take a look at my cults profile, because you will find a lot of interesting projects, and I’m sure you’ll find something that will do for you, I also remind you to leave me a like if you appreciate my work and follow me.

Layer 0.12 or 0.16
Temp 220° / 65° PLA
Infill 10%
Top and Bottom Layer 3
Perimeter Layer 2
Speed Unlimited