ITSLITHO PERSONALIZED LITHOPHANE CHRISTMAS BALL TOP and bottom

Following on from Ludo3ds Design. I found using ballon LEDs outdated and just annoying due to battery life.

Again his verion for cabled lights was not my cup of tea, 2 parts, brittle (Maybe my printing) and more likely to have some come back from any one i gave it to.

I've designed a new top for his bauble profile so you can print just one part and use it on what it seems like any set of wired christmas lights.

Profile to use is https://tool.itslitho.com/profile/63246b1b

This version of the the top i find is a better fitting then Ludos and the bottom will be slight better aswell . To add my version is meant to be used with some glue... not much but i find it still locks in place. My process is to glue all tops and bottoms so i don't get any complaints of them falling of gives me wiggle room for any post processing errors

I've also included the Lock ring aswell. This is not needed but its there if wanted. Just slide through the LED first and then locks the bauble in place. Nothing special.

Any questions let me know but link to Ludos design is below for the his other designs of the bauble top and bottoms which may i add are some cool designs.

https://cults3d.com/en/3d-model/various/istlitho-pure-customizable-lithophane-christmas-ball/comments

Any speed you want. The slower the better but I print mine at 100mm/s and sand the bauble opening with a round file and keep testing till im happy and glue in place.

No Supports on the bauble top
Supports for the bauble top lock if needed/wanted.