John McClane Air Duct - Christmas Tree Ornament

I didn't come up with this idea, but I didn't like any of the available models or they weren't detailed enough, so I designed my own :)

The debate is open, but Die Hard 1 (Die Hard) is surely one of the best Christmas movies.

This Christmas tree ornament takes up one of the film's most iconic scenes, where John McClaine sneaks into the ventilation ducts of Nakatomi Plaza.

This "Christmas bauble" will add the perfect touch to your tree and is sure to surprise your guests when they discover it.

One of the things I definitely wanted to add was John's lighter lighting.

The easiest way I found was to use an LED from a string light (preferably a colorless or yellow one).

You'll need to fit one of the LEDs from your garland to the back of the fan (see image 4).

-There are 3 models of ventilation duct to be printed, depending on the diameter of the LEDs in your garlands (hole: Ø3.5 - Ø 4.5 - Ø5.5).

-There's also a model without a hole if you don't want to light the lighter.

The download includes a print-ready PDF with correctly sized photos of John and the terrorist through the grid.

No tools are required for assembly, just glue the two images to the bottom of the vent and inside the grid.

Feel free to check out my other designs, the lighter cases I offer are perfect gifts for the holidays :)

(Note: If the LED doesn't stay in place, you can fix it with a dab of hot glue)

My model is protected.

You don't have my permission to sell my files or 3D prints of the model.

You do not have my authorization to modify my model.

-Nozzle: 0.4mm

-Coating thickness: 0.2mm

-Filling: 80% mesh

-number of walls: 3

-Without support

-See last image for layout on printing plate

-Printed with Amazon Basic silver PLA filament

-Vent size: 67.5mm x 42.5mm x 58mm