The Jetsons Logo
The Jetsons Logo
Published 2023-12-15T20:35:52+00:00
The Jetsons Logo
This logo can be used along with all my previous Jetson's models to create a complete display.
The main logo is meant to be printed with color changes and is one single STL file. The stand is printed separately and glued to the logo.
Enjoy!
**Print instructions**
Start with a dark blue and then color changes as follows:
layer 1.6mm change to light blue
layer 2.8mm change to black
layer 4.4mm change to white
Following are the filaments I used:
Dark blue: Devil Designs - PLA, Ocean Blue
Light Blue: Devil Designs - PLA, Blue
Black: Devil Designs - PLA, Black
White: Overture - PLA, White
I've included a Prusa Slicer 3MF file that I used for this print with the color changes needed for the main logo.
Date published | 15/12/2023 |
Support Free | YES |