Skip to content

Radiant LIGHT TREE, CHRISTMAS DECORATION WITH TEALIGHT

baum_mitlo001b.jpg Radiant LIGHT TREE, CHRISTMAS DECORATION WITH TEALIGHT
baum_mitlo001.jpg Radiant LIGHT TREE, CHRISTMAS DECORATION WITH TEALIGHT
baum_oese_mitlo_001b.jpg Radiant LIGHT TREE, CHRISTMAS DECORATION WITH TEALIGHT
baum_oese_mitlo_001.jpg Radiant LIGHT TREE, CHRISTMAS DECORATION WITH TEALIGHT
baumstamm.jpg Radiant LIGHT TREE, CHRISTMAS DECORATION WITH TEALIGHT
Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.
  • 154 views
  • 1 like
License
3D design format
ZIP Folder details Close
  • baumlochversion.zip
    • baum_mitlo.stl
    • baum_oese_mitlo.stl
    • baum_stamm.stl

Learn more about the formats
Publication date 2023-12-18 at 18:17
Design number 1651397
Phils_Creations

Phils_Creations

3D printer file info

3D model description

Small illuminated Christmas tree in two versions.

It has holes for light beams in the area of the needles.

It also looks good in the car.

Please read through everything!

Warning!!!!!!!!!!!!

May only be operated with electric tea lights.

Mounting: Tree trunk and branch area have a fine thread 1.5 mm pitch

Carefully remove the separating ridge from the thread before fitting.

First coat the thread with Vaseline, butter or grease so that it can slide.

I used Vaseline. Carefully and carefully screw the tree trunk into the branch area.

This design is not for rough locksmiths!

If problems occur, print the trunk area slightly smaller again 0.05 to 0.1 mm. I have already included a separation gap of 0.1 mm.

You can download 2 different tree versions here.

Tree A top without eyelet.

Tree A above with eyelet.

There is a hole in the tree trunk so that you can switch the electric tea light on/off.

The inner ring on the branch section must be carefully cut off.

It is intended as a support segment. The branch/branch section and tree trunk are easily printed without support.

3D printing settings

Support-free printing. Preferably with transparent PLA or PET-G.

Infill 2.8mm GRID is sufficient

Tags

Advertising

Page translated by automatic translation. See the original version.
Issue with this design? Report a problem.
Check out similar designs

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi πŸ’œ.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.