The Flinstones Logo
The Flinstones Logo
Published 2023-12-18T20:44:36+00:00
The Flintstones Logo.
This logo can be used along with all my previous Flintstones models to create a complete display.
The main logo is meant to be printed with color changes and is one single STL file. The stand is printed separately and glued to the logo.
Enjoy!
**Print instructions**
Start with a stone/marble color and then color changes as follows:
layer 8.2mm change to black
layer 9.8mm change to red
Following are the filaments I used:
Marble: Devil Designs - PLA, Marble Dark
Black: Devil Designs - PLA, Black
Red: 3D-Fuel - PLA, Iron Red
I've included a Prusa Slicer 3MF file that I used for this print with the color changes needed for the main logo.
Included is also a zip of parts (excluding the base) that can be used with the MMU/AMS/Palette.
(myminifactory expands zip files, so the files that start with 'mmu' are the files that were in the zip and are to be used only for multimaterial printing.)
Date published | 18/12/2023 |
Support Free | YES |