Infrared Camera Holder for Samsung S23 with Otter Box

I recently purchased a new Infrared Camera from Amazon. I really liked the resolution, compactness, the ability to connect it to a PC or my S23 and according to the marketing literature, the ability to connect directly to the USB-C port with no cable. HOWEVER, the literature was misleading as it touted an "extended" USB-C to accommodate phones with a case. It did not work with the Otter Box case. Not even close. I did not want to use a USB extension as that would have made the entire phone and IR Cam package too long and awkward. The manufacturer provided a cable and a nice case for the IR Cam. It works also with a PC through the adapter they included. I liked the idea of having the camera directly attached to the back of the S23 so I designed this holder. Features I included were some cord management slots and a cage to capture the excess wire. It turns out I can leave the camera in the holder and it fits perfrectly in the case they provided as long as you removed the glued in piece of foam.

Pics provided show it in use, assembled and disassembled. It will stand freely on a desk if you are using it with a laptop as well.

Print time 2Hrs 5minutes with 1mm supports.

PLA, I used Overture Pro Filament: extruder set to 220C, room temperature bed (25C), 60mm/s, cooling fan on. Infill pattern, rectilinear at 80%.