Simple Stands & Trophies 🏆

Easy to print awards and trophies or simple signs and mementos!

Two different shapes for the base included along with some signs and blanks for customization*. Add your own text or logo!

Sign inserts include 1st, 2nd, 3rd, #1, and "League Champ" along with short and tall blank inserts. Also, blank "plates" for the rectangular base are included as a way to add text with a second color. See photos for example.

Also see my Football Stand with Signs and my Trophy Awards for more.

*Reminder: For personal use only. No published remixes or selling of models without permission. See © link.

Stand bases are approximately 113x 53 x 245 mm (Trapezoidal) and 104 x 40 x 25 mm (Rectangular). The short inserts are 91.4 x 82 x 4.4 mm and the tall inserts are 91.4 x 112 x 4.4 mm. (Blank ones are 3.4 mm thick.) The text is 1 mm thick, so color swaps work well at 3.4 mm height.

I printed the bases with 0.25 mm layer height, 3 perimeters, 3 top and bottom solid layers, and 10% infill. The inserts were printed with 0.25 mm layer height, 2 perimeters, 3 top and bottom solid layers, and 15% infill.

For the texture on the inserts, I modified the top layer of the plate to print with 80% or 65% honeycomb infill and no top layers. I also modified the top layers of text to print with 1 perimeter so there is more room for external infill. For the "14" I used an additional modification to create the outline by printing the very top layer with 2 perimeters, 0 top layers, and 0% infill. This insert was done with two filament swaps on a single-color machine.

No supports. No raft.

Reminder: If you add your own text or logos to the blank plates, don't put it too low and obstruct insertion into the base.

Not for commercial use. No derivatives. See © link.