One-handed corner clamp

14 models

Material:

The corner clamp is made of ASA; one ball joint contains an M8 nut. The covers for the ball joints are closed with m3x4x5 nuts and m3x10 screws. You will need 8 pieces of m3x10 and 8 pieces of m3x4x5. (the model you see in the pictures is the prototype, I have adjusted the areas of the fusible nuts so that it looks / holds better. And 1 nut M8 (I used an ASA acetone mixture to combine the hand crank with the threaded rod, ATTENTION PLEASE BE CAREFUL HERE!!! Stir the mixture in a jar, with a lid very important! Stir the mixture with a wooden stick! . IF YOU ARE NOT COMFORTABLE WITH THIS PROCEDURE, PLEASE CONTACT ME AND I WILL THINK OF AN ALTERNATIVE. ) the M8 crank rod should have a length of approx. 215 mm

The corner clamp is designed to speed up and facilitate work processes

Swing jaw design:

The jaws of the angle clamp can swing to the left and right, giving you comfort when fixing.

Easy handling:

Simply insert the plank into the miter clamp to determine the position and tighten the 90 degree angle clamp.

Suitable for complete application :

This corner clamp is perfect for assembly, alignment, nailing, woodworking, screwing, doweling, making cabinets, box, picture frame and aquarium etc.

Clamping range:

The maximum clamping range is approx. 55 mm; jaw width: approx. 70 mm with jaw protector (75 mm without jaw protector); jaw depth: 22.8 mm. can clamp materials such as steel rod, metal pipe, wood, thick glass, etc.

have fun with it

Material ASA at 245c/110c layer height 0.2 infill 50% , ball-jointed with supports.

Material tpu for the already baked. your manufacturer's recommended temperature of the tpu, don't know what you have at hand. layer height 0.1 infill 100%

IMPORTANT FOR THE HANDLE:

load the files both at the same time puller turner thing there and drill negative. because the file puller turner thing there has a drill diameter of 5 and we need 8 and the drill negative has 8!